CG Gloss Workz Glass Cleaner

[Bunky]

I have used CG Gloss Workz quite a few times now and have not really found a way to end streaking. I know some like Mike have had great success with this product.

It has a very nice smell (smells almost identical to CG Speed Wipe) so fun to use. It seems to be a fine cleaner but in many ways it behaves like a detailer than a glass cleaner. Since it has no alcohol, it will not partially flash off like alcohol glass cleaners that can reduce how much buffing you need to do.

The problem I have is I get it streak free but then come back in several hours (car doors closed) and a haze (just like a wax hazes) has formed on the inside glass. This is the reason it makes me think of a detailer. I also only see this
on interiors and they are usually closed up during this period.

A simple wipe will remove the haze and all is well.

I keeping thinking they put the wrong product in the bottle especially since it is like the speed wipe.

I have been alternating mostly with Meg's and do not see this (using same technique and microfiber).

 

[mjlinane]

Are you using full strength or cutting it? I use it 4:1 and have no problem with streaking.

My technique: spray on glass mf, apply to glass, "buff" with dry glass mf.

 

[Bunky]

I use it full strength. I could see where diluting would like reduce the haze. It is not really streaking. It is a haze.

 

[Beemerboy]

Bunky, I think it's in the dilution ratio. I use to have a concentrate glass cleaner and had to play with it until I finally dialed in the right mixture, to keep it from streaking and hazing.

It's why I went to Stoners and or Spray-way

 

[Bunky]

I would have never considered diluting it.

My favorite is sprayway too but like to try others since I am also cleaning glass regularly.

 

[Todd@RUPES]

Thanks for sharing Al!