Can I use DG#105 after using PWs?

[nathansdad04]

Pws has a sealant in it...after polishing with the PWs can I use the DG bonding agent and #105? Or do I have to wash with Dawn to strip the sealant first?

 

[Larry A]

I would say just put the #105 over the PWS. I dont think that you will need the bonding agent.

 

[nathansdad04]

Will the 105 adhere to the PWs sealant? I love the 105 and AW...so I'm hoping the sealant doesn't negatively affect the looks of the DG.

 

[CharlesW]

I certainly hope so!!!
When PwS is available it will most likely be my replacement for Klasse AIO.
My process will then be:
1. Swirl removal
2. PwS
3. DG 601 Bonding agent
4. DG 105 Total Performance Polish
5. Next day DG 105 TPP (Mostly to assure even coverage)
6. Following day DG 952 Aqua Wax
7. Every 30 days DG 952 AW

Swirl remover or PwS will be used as/when needed to remove any marring I cause while washing the vehicles.

The PwS will probably be great as a base for the DG 105 and the DG 601 is so easy to apply, I definitely will use it for my first application of the DG 105.

Charles

 

[jsfofec]

I did this 2 weeks ago. I used PWS then 2 coats of 105. Came out very nice. You probably won't need a bonding agent, but you could use one if you want

 

[nathansdad04]

That's good news. Any advice on what LC pad to use to get rid of my micromarring? Does the PWs have the same consistency as SSR1 etc? It's not watery like PP is it?

 

[Surfer]

I thought #105 had some cleaners in it, so would that affect the PWs later left over?