PolishedImage
New member
We had a customer who was very budget minded approach us about doing some wet sanding for him. He told us he painted his Lotus Elise by himself in his shop and needed help smoothing out the paint and sanding out the imperfections. Usually this kind of situation would have sent us running for the hill especially when his budget would only allow for about 10 hours worht of work. We are breaking the work into two sessions, the first is the wet sand and rough buff tomorrow will be final cut and polish and wax.
SESSION 1
Jason and Brian devised a plan and the owner helped by removing the hood, bonnet, tail lights and other trim to allow unfettered access to the car.
Used 3M 1000 grit, Mirka 1500 and 2000 Grit, Meg's 105 and 205. Used ChemGuys Hexlogic pads and Shurbuff pads with DA, Rotory and Dynabrade
So from 8:00am until 5:00pm here are the results, more pictures after SESSION 2 tomorrow:
SESSION 1
Jason and Brian devised a plan and the owner helped by removing the hood, bonnet, tail lights and other trim to allow unfettered access to the car.
Used 3M 1000 grit, Mirka 1500 and 2000 Grit, Meg's 105 and 205. Used ChemGuys Hexlogic pads and Shurbuff pads with DA, Rotory and Dynabrade
So from 8:00am until 5:00pm here are the results, more pictures after SESSION 2 tomorrow:
