Bmw M3 Full Adhesive Removal/Correction - Lucci Elite

[LucciElite]

I received a phone call concerning a M3 that had recently had a matte white wrap pulled off of it. The client was concerned about all of the adhesive on the edges and left over matte black wrapped pieces wouldn't look like or couldn't look perfect again. After going out to quote the vehicle I knew it was at least 10-12 hours of just cleaning up the adhesives and taking apart the car to remove the rest of the parts that were wrapped matte black. Once the car was delivered to my shop we got right to work with the adhesive removal. Before the wrap was put on it was evident the wrap company used a ton of adhesive promoter because this stuff was rock hard and a pain in the *** to get off. The door handles, top hood vents, side vents, and the wing on the trunk would be pulled off to properly remove everything... After the adhesive removal the correction wasn't to bad as the car had been wrapped two weeks from the day it was purchased. No sun was out by the time the car was finished but enjoy the reflections.



Adhesive Everywhere

Company Seemed To Forget About The Rest Of The Grill

Door Handles/Lip Still Needed To Have Matte Black Pulled Off

Paint Was Pulled Off When They Removed The Matte White

1



Vents Pulled Off... Adhesive Promoter Everywhere

Wash/Prep Process Started Very Late That Night

Robby Handling The Master Blaster

Before Damage Under The Led

Myself Correcting The Hood

Trunk 50/50

Had A Few Dents So I Had My Dent Guy Demyan From LuxPdr Come Out

Engine Looking Good Again

2

Interior Cleaned Up

Final Shots