2009 BMW 535, owner picked it up a few weeks ago. Had some holograms on the trunk lid and water spots on the hood, otherwise it was in pretty good shape for a 3 year old BMW with sapphire black paint. It could have used a full correction but after taking care of the issues on the hood and trunk lid, plus 1 step on the rest of the car, the owner was very pleased with how it looked. Its a daily driver that does a 50 mile round trip commute through a construction zone with a planned completion date of 2015 so perfection will be very tough to maintain but protection was of paramount importance.
ONR wash
Clay Magic blue clay
Meguiars #105 using an Optimum microfiber cutting pad and my PC 7424 XP on speed 5-6 on the trunk lid and hood
Optimum Hyper Polishing using an Optimum microfiber cutting pad and my PC 7424 XP on speed 5-6 on the whole car
ONR wash
Opti-Coat 2.0 on paint and wheels.
Armor All on tires/fenderwells
----------------------
2012 Hyundai Genesis Spec R 5.0. Originally we were going to Opti-Coat this car about a month ago. Unfortunately, due to the heat and getting a syringe of Opti-Coat that was in the wrong syringe (the supplier sent the wrong ones to Optimum) and affected the product application we had to strip what we applied off and just Opti-Seal the car until I got some new OC in and the owner returned from a planned vacation.
ONR wash
Optimum Hyper Polishing using an Optimum microfiber cutting pad and my PC 7424 XP on speed 5-6 to remove the Opti-Seal
ONR wash
Opti-Coat 2.0
Armor All on tires/fenderwells
The proper syringe made all the difference in the world! No problems at all during the application this time. It was also 20 degrees cooler (mid 80s vs 105) which gives a bit more time to find any high spots (which were few and far between). The paint is pretty spectacular on this car, the multi-colored flake has a 3D affect when you see it in person, as if the flake is in both the color coat and the clear.
ONR wash
Clay Magic blue clay
Meguiars #105 using an Optimum microfiber cutting pad and my PC 7424 XP on speed 5-6 on the trunk lid and hood
Optimum Hyper Polishing using an Optimum microfiber cutting pad and my PC 7424 XP on speed 5-6 on the whole car
ONR wash
Opti-Coat 2.0 on paint and wheels.
Armor All on tires/fenderwells







----------------------
2012 Hyundai Genesis Spec R 5.0. Originally we were going to Opti-Coat this car about a month ago. Unfortunately, due to the heat and getting a syringe of Opti-Coat that was in the wrong syringe (the supplier sent the wrong ones to Optimum) and affected the product application we had to strip what we applied off and just Opti-Seal the car until I got some new OC in and the owner returned from a planned vacation.
ONR wash
Optimum Hyper Polishing using an Optimum microfiber cutting pad and my PC 7424 XP on speed 5-6 to remove the Opti-Seal
ONR wash
Opti-Coat 2.0
Armor All on tires/fenderwells
The proper syringe made all the difference in the world! No problems at all during the application this time. It was also 20 degrees cooler (mid 80s vs 105) which gives a bit more time to find any high spots (which were few and far between). The paint is pretty spectacular on this car, the multi-colored flake has a 3D affect when you see it in person, as if the flake is in both the color coat and the clear.






