Best place to pick up LC 7.5 inch pads?

[gbackus]

I'm looking to get 1 yellow cutting pad, 2 white polishing pads, 1 black finishing pad, and a backing plate for the rotary and the porter cable. Also need a pad brush. Any suggestions for best price?

 

[xhaust50]

Top of the Line has very good prices on LC pads.



www.topoftheline.com



Although I recently had a problem with my 6.5" pads from there and they would not exchange them because I had them for three months, I will still recommend that as their customer service has been top notch.

 

[holland_patrick]

Classic Motoring Accessories



Advanced, 8.5 Inch Pads 46-785VC 2 6.95

for Circular Polishers.:

8.5 inch Grey Finishing

Pad

Advanced, 8.5 Inch Pads 46-585VC 1 6.95

for Circular Polishers.:

8.5 inch Yellow Cutting

Pad

Advanced, 8.5 Inch Pads 46-685VC 2 6.95

for Circular Polishers.:

8.5 inch White Polishing

Pad

Advanced Finger Pads for 45-508 1 9.95

Circular Polishers: 8-1/2

inch, Yellow Foam Finger



get them while you can they are on close out

 

[Thomas Dekany]

I second CMA - I tell you that the pads are different. CMA pads are well priced too. Unfortunately my customer service experience with TOP has been terrible.

 

[dternst]

Give Detailer's Paradise a try at www.detailersparadise.com. Nick offers the pads in cost saving bundles.

 

[gbackus]

Classic Motoring Accessories



Advanced, 8.5 Inch Pads 46-785VC 2 6.95

for Circular Polishers.:

8.5 inch Grey Finishing

Pad

Advanced, 8.5 Inch Pads 46-585VC 1 6.95

for Circular Polishers.:

8.5 inch Yellow Cutting

Pad

Advanced, 8.5 Inch Pads 46-685VC 2 6.95

for Circular Polishers.:

8.5 inch White Polishing

Pad

Advanced Finger Pads for 45-508 1 9.95

Circular Polishers: 8-1/2

inch, Yellow Foam Finger



get them while you can they are on close out

Do you have a link to the CMA website?

 

[roaringmouse]

Classic Motoring Accessories:



http://www.properautocare.com/

 

[Mmmph]

If best price makes for the best place, then visit:



http://www.smartshoppersinc.com/buffing-pads/Lake_Country_Buffingpads.html



Great pad prices here, but I don't know anything about those backing plates.

 

[General Lee]

I second CMA - I tell you that the pads are different. CMA pads are well priced too. Unfortunately my customer service experience with TOP has been terrible.

I'm getting disapointed w/ CMA pads, and I thought you were having problems w/ them too.:nixweiss



gbackus- www.autogeek.net

 

[Mmmph]

gbackus- www.autogeek.net

I don't think AutoGeek sells the LC 7.5" pads.

...or, I should say I can't find them there.

 

[BookemDano]

I use the CMA LC Pads. The CMA pads are "Constant Pressure" pads. They have a second layer of blue foam that "...acts as a cushion or shock absorber between the machine, the operator and the surface being worked on. It absorbs off-axis motion while maintaining a constant and uniform pressure on the surface."



Here's a link that explains "Constant Pressure" (towards the bottom):

http://www.properautocare.com/mafopaloatla.html



Here's a link about the 7.5" Constant Pressure pads:

http://www.properautocare.com/ad712inhipa.html



And Here's a link for the 7.5" pad kit with flexible backing plate ("7424-ADV Kit"):

http://www.properautocare.com/ad712inhipad.html



Make sure that you include a "FBP-6DA" for your PC and and a "FBP-6C" for your rotary. You can order one of the kits that includes one of these pads. Here's a link showing the PC backing plates (including the "FBP-6DA"):



http://www.properautocare.com/flbaplfordup.html



And finally, here's a link showing the rotary backing plates (including the "FBP-6C"):

http://www.properautocare.com/flbaplforcip.html



Good luck on your decision.



Regards,



Dan.

 

[General Lee]

I don't think AutoGeek sells the LC 7.5" pads.

...or, I should say I can't find them there.

I think your right! My mistake, I didn't read the thread thoroughly:doh

 

[holland_patrick]

I'm getting my pad's today in hours I hope i'll tell you how they fit/look

 

[bufferman71]

Autogeek does sell LC 7.5 inch pads

 

[MattZ28]

LC 7.5" Pads

 

[Mmmph]

Autogeek does sell LC 7.5 inch pads

Ooops...I really need to stop splitting my pills...:xyxthumbs

 

[maesal]

I use the CMA LC Pads. The CMA pads are "Constant Pressure" pads. They have a second layer of blue foam that "...acts as a cushion or shock absorber between the machine, the operator and the surface being worked on. It absorbs off-axis motion while maintaining a constant and uniform pressure on the surface."



Here's a link that explains "Constant Pressure" (towards the bottom):

http://www.properautocare.com/mafopaloatla.html



Here's a link about the 7.5" Constant Pressure pads:

http://www.properautocare.com/ad712inhipa.html



And Here's a link for the 7.5" pad kit with flexible backing plate ("7424-ADV Kit"):

http://www.properautocare.com/ad712inhipad.html



Make sure that you include a "FBP-6DA" for your PC and and a "FBP-6C" for your rotary. You can order one of the kits that includes one of these pads. Here's a link showing the PC backing plates (including the "FBP-6DA"):



http://www.properautocare.com/flbaplfordup.html



And finally, here's a link showing the rotary backing plates (including the "FBP-6C"):

http://www.properautocare.com/flbaplforcip.html



Good luck on your decision.



Regards,



Dan.

Can you tell me your experience with this PADs via PC?

I read that this ones:

http://www.properautocare.com/hi612infopaa.html

are the best for using LC PADs vía PC, and I must include the 6" plate. Do you know how much will be the shipping to Spain?

Thanks.