Bad Scratches Please Help

BigDs2002v6

New member
I am putting my car up for sale and I was taking out my stereo system and on the trunk I had a magnitized XM radio Antenna on the back. Well I took it off and there are some bad scratches all around the magnet. I am new and have yet to buy anything to start detailing so what can I use to make that area look better. I have Megs Scratch X and some 3m swirl Remover at home. But i do not have a polisher yet :( So what can i do..

Thank you so much,
 
ScratchX by hand might be able to remove the scratches. If they are really deep, you may be stuck with touchup painting.
 
I would follow the directions on the Scratch X container, and just do that by hand. It sounds like you have them just in a small area so that should work. Scratch X is made for use by hand.
 
Thank you guys, that really did help alot! Another Question? When i get my PC and apply product like ssr's or AIO, do i wipe it off with a mf towel or use a different kind of pad on the PC?? And which Pads should i use for ssr's, aio, and nattys?
 
Wipe of the product with a MF towel, yes. You can get MF buffing bonnets if you wish, which will replace the need for a MF towel to remove the product.



Pads for the SSRs:



I use yellow or orange for use with SSR3 and SSR2.5, sometimes green for 2.5.

For SSR2, I generally use green.

I don't have SSR1, but I'd use a blue pad.



For AIO, I use green or blue pads. For bad oxidation I've used AIO with a yellow pad.



For Nattys, use a gray finishing pad or apply it by hand.



BTW these colors all refer to Propel pads.
 
Back
Top