Applying SG with PC?

zesty-man

zesty-man

how do ya like it?
hey, i know there has been a lot of unrest of SG, but i was wondering, could/should you apply klasse SG by PC? and if so, what speed should i be going at? i tried to run a search, but none of the threads really answered my question. thanks for the help!
 
I used to apply sg with pc, but I recently switched to doing it by hand. I noticed that it goes alot of faster by hand because it's easier to get thin coats than with pc.
 
hmmm, thin coats by hand. ill try that. are u using a foam applicator? also, do you go panel by panel, or you prefer to only work in 2 x 2 spaces?
 
When I use SG, goes on at 4 with a finishing pad. I remove with MFs. Personally I get thin and more evenly distributed coats with PC than by hand.
 
one thing ive noticed when i was using the PC was that it dries really quickly, so you dont really have time to really thin it out, unless you work in only one place. i was using a finishing pad at 5, but really seemed to make the work harder. how much product did you put on the pad?
 
zesty-man, I use a thin bead around the perimeter of the pad for 1/2 a hood.

Teck, I use 3m masking tape over my trim. It may take a some time to cover up trim and stuff, but it will save a lot more time if you have to remove it.
 
Unreal said:
I would say he means a skinny line the whole way around the outside of the pad about 1/8 to 1/4 inch wide.
Click to expand...

Yeah, kinda. Maybe even thinner that that. I should clarify, that that's for my initial application. Once the pad starts to get loaded, I'll use less. Sorry for the confusion.
 
You must log in or register to reply here.
Back
Top