Anyone Used Ultrafina with PC or Cyclo?

[bdaly84]

I know that 3M Ultrafina is supposed to used with a rotary. I was just wondering if anyone has tried it with any DA machines? If so...what pad choice and what were the results.



Thanks

 

[Thomas Dekany]

Yes it will work just fine.

 

[imported_themightytimmah]

Yep, worked fine on a new car prep for me. I used it with a white pad via PC, the correction wasn't huge but it cleaned up minor marring 100% and left a great finish.

 

[Accumulator]

Similar-but-different: I used 1Z High Gloss via Cyclo with blue Sonus finishing pads. This was on an already-corrected '00 Audi and it did give a considerably nicer final finish. The same combo did *not* do correction when I tried it on a not-bad RIDS I had missed, so I'd only consider this for final burnishing.

 

[bdaly84]

Thanks guys! I figured it would be fine. I have been wanting to try it, but did not want to buy it, if using a DA would yield poor results. I need a new finishing polish and was torn between 106ff and UF. My local PB store has UF for about the same money as 106ff shipped to me.