AIO!!! Some Advice!!

I have never used SG because I've always liked the finish I got with just the AIO. I can't say if the SG is water soluble because I've never tried it. Regular tap water is all I use to dilute AIO and it really does save the end user money. I only use this solution for quick detailing, not for detailing a customers car paint finish. That is when I use the AIO full strength.
 
With so many great QD sprays out there, I don't know what advantage this would really offer for me. I already have Quik Shine, QD+, Crystal Mist and another trial product among my QD sprays. I can't imagine and another one.
 
I hear ya Scott. I accidently discovered this trick with AIO and have been using it ever since. I still have my Four Star Spray Wax that I only use as a lubricant for my claying and buffer pad prepping.
 
prgallo said:
Check it out, it's a documented approach at http://www.customacrylic.com/klasse.html

It can also be added to the wash water, although I haven't tried it. I really like the AIO QD for door jams, under the hoodl, trunk etc... It works because it mixes with water, which I believe SG does not. Two very different products.

While this approach is very user friendly for use on the car, the most awesome results using AIO, for me anyway, are by following the advice in http://www.autopia.org/forums/showthread.php?s=&threadid=40623&highlight=AIO+Tip
Click to expand...

Not sure if this site is a credible resource. They sell the product but look at their advise.

They recommend using an old tee shirt and circular overlapping motion (by hand)

"By Hand: For non-oxidized surfaces - The vehicle surface should be fairly clean. Start with a damp cloth and a small amount (about the size of a quarter_ of "All-in-One". Apply with circular overlapping motions and even pressure, wipe off immediately. This technique eliminates residue, and collecting in trim-texture surfaces. For severely oxidized surfaces - Start with a dry cloth and apply a small amount of "All-in-One", as above. A repeat application may be necessary. Additional coats (layers) will stay "crystal- clear" and leave the protected surface with the feel of polished marble."

"Selecting cloths: Avoid synthetic fabrics such as rayon. They can scratch the finish. Use cotton cloths like diapers, cotton T-shirts, or towels. Use thin material for application. Use thick fabric for removal. "
 
Dalton said:
Not sure if this site is a credible resource. They sell the product but look at their advise.

They recommend using an old tee shirt and circular overlapping motion (by hand)

"Selecting cloths: Avoid synthetic fabrics such as rayon. They can scratch the finish. Use cotton cloths like diapers, cotton T-shirts, or towels. Use thin material for application. Use thick fabric for removal. "
Click to expand...

Maybe it's old instructions. I believe these type cloths were status quo until microfiber was introduced to auto detailing. :dunno I could be wrong. A lot of products still advise the use of these type cloths.
 
They should update. Also, that would be VERY dated recommending tee shirts. I know cotton towels are still used by some but a tee shirt?
 
It's not unheard of for people to use a tee shirt. I'm not recommending it, but it's all about what people want to use. Keep in mind not everyone sees it as prudent to shell out $5-10 for a microfiber towel. I won't say I agree with it, but then again, that's just my opinion. I guess some people have their ways set, and if you are going to market to an uneducated public (which a lot of people who clean cars are - uneducated about the products and procedures) you have to keep it as simple as possible. Just a thought.
 
A couple things I'd like to contribute as I read this thread (some good info, btw).

The AIO bottle I have, IIRC, recommends using diluted AIO both in wash water and as a diluted quick detail spray (they don't use the phrase QD, I don't think, but words similar). So, the fact that it's on the bottle itself should remove any question of the credibility of the approach. Now, how well it works is certainly a subjective matter. I tried it a few times, and while it was ok, it wasn't as good as some of the QD sprays I had, so I didn't do it anymore.

The approach of using a mildly diluted form with a PC as a prep, though, is very interesting to me. I might try this next time I tear down and polish and rebuild.

As far as t-shirts, sometimes I still use an old 100% cotton (white) t-shirt to apply SG by hand. I keep old ones, cut into about 10" squares, in a bag with my stuff for various grunge duty. These are undershirts, and by the time they make it to the bag they're usually very soft from being laundered so many times. When they get ugly, I throw them away. It's easy to get a thin layer of SG with them, and the t-shirt doesn't absorb much (I feel like I waste at least 3X as much as I apply if I use a foam applicator), and so far I haven't seen any resulting swirls. Interestingly, this is the only way I've been able to apply SG so that it seems to almost "absorb" into the paint when applied, making removal very easy.

my $.0.02 worth, YMMV.

blue skies,
Andrew
 
It will work very well, I have been using it on my windows inside and out and it has never let me down. Not only does it clean but it also leaves a nice slick shiny surface.
 
I also, had trouble taking off both Klasse the polish and the glaze, however I used Meguiars' Detailing Mist to get rid of the left over I couldn't get with the MF towel and I got a fantastic shine, It worked great on my 03' 4Runner plastic cladding, so shinny that you could actually see the glitter particles in the plastic. At the beginning I was disappointed with the product since it was so difficult to take off, but now that I used the mist, the truck looks really nice! I don't know if by using the mist you are actually taking off the product though.
 
AIO was hard to take off? You maybe letting it apply to thickly and leaving it. SG is a pain, but when done right it gives good results.
 
JaredPointer said:
It's not unheard of for people to use a tee shirt. I'm not recommending it, but it's all about what people want to use. Keep in mind not everyone sees it as prudent to shell out $5-10 for a microfiber towel. I won't say I agree with it, but then again, that's just my opinion. I guess some people have their ways set, and if you are going to market to an uneducated public (which a lot of people who clean cars are - uneducated about the products and procedures) you have to keep it as simple as possible. Just a thought.
Click to expand...

Yeah like my dad used to tell me that Pledge was the best thing to use on dashboard. Good thing I didnt listen to him!!!
 
You must log in or register to reply here.
Back
Top