This may sound dumb to some of you guys, but I'm the lazy sort of guy. I was wondering how well does AIO work as a polish to remove some of the leftover imperfection left by #83. I know its best to use some type of swrill remover/polish before using AIO, but I was wondering how would the gloss be if I went to it direct to AIO. Thanks for any advice
AIO directly over #83
- Thread starter jetskie
- Start date
Nothing wrong, or lazy about your approach. I've used that exact combination topped with Platinum (now 4*) UPP on a white vehicle. Looks nice.
AIO
AIO
. If you are referring to removing "hazing" (I rarely experience any), AIO should do fine. Anything else, like remaining scratches, swirls (marring) and you might want to look elsewhere.
JasonD
New member
The one determining factor of whether you can use AIO directly after #83 is how well you polish with #83. If you try to rush #83 and don't allow the diminishing abrasives do their job you will experience some marring and/or hazing. On the other hand, if you take your time and progressively reduce pressure while polishing, you should be left with a practically LSP ready finish.
The key to detailing: Patience
The key to detailing: Patience