This is another car that after sending to a painter shop for some touch-up, the car ended up with lots of buffer swirls and certain part of the paint work actually looked quite blur. The swirls were not too bad but the blurry effects were pretty tough to get rid off. Out of all, it was the roof that gave the most problem; it was basically covered with scratches.
1. wash & clay
2. IP/RMG mix + Orange pad + DA @ speed 5 (certain areas received 4-5 passes)
Here’s the result after the above steps,
Before
After
Before
After
Before
After
Before
After
With most of the defects removed, than I proceed as follow,
3. Vanilla Moose + Green pad + DA @ speed 4
4. Carnauba Moose Wax with foam applicator by hand
5. Buff off the residue with JW Carnauba Jett using MF towel by hand
These last 3 steps really add an amazing glow, depth and wetness to the car, the photos shall do the talking.
When I started with the photo session, the weather looked like this,
Not even half way through the session, it became like this,
Had to go through the photo session real fast before it starts to rain, so here’s the result.
Here’re a few close-up and mirror reflection shots,
1. wash & clay
2. IP/RMG mix + Orange pad + DA @ speed 5 (certain areas received 4-5 passes)
Here’s the result after the above steps,
Before
After
Before
After
Before
After
Before
After
With most of the defects removed, than I proceed as follow,
3. Vanilla Moose + Green pad + DA @ speed 4
4. Carnauba Moose Wax with foam applicator by hand
5. Buff off the residue with JW Carnauba Jett using MF towel by hand
These last 3 steps really add an amazing glow, depth and wetness to the car, the photos shall do the talking.
When I started with the photo session, the weather looked like this,
Not even half way through the session, it became like this,
Had to go through the photo session real fast before it starts to rain, so here’s the result.
Here’re a few close-up and mirror reflection shots,
.