A few questions

E

emanLS

New member
ive got a few unrelated questions that i hope u guys can help me with.

1. I used ssr 2.5 a couple days ago and i didnt realize that some of it splattered on the front bumper of my car and sat there for over 48 hours. I tried wiping them off with some QD and a mf but they didnt come out. Does anyone have any suggestions as to what i should do? Will this harm my paint?

2. How do u use the PC to get into tight spots and around emblems? Do u apply by hand on the bumpers where there isnt enough room?

3. Will the normal vinigar that i have in my house for cooking work to take out water spots.

completely unrelated and random but they were on my mind... thanx for any help/advice guys!!!!
 
1.) Check with Steve
2.) You do it by hand where the PC or polisher wont' fit
3.) Yes, you use regular vinegar (I was told 50/50 solution w/ water). If your lucky it will work but not always

Hope that helped
"J"
 
1) I would go over those spots with SSR2.5
2) pick an appropriate pad and go at low speeds or do it by hand
3) as I stated on your other post and what NEW AGAIN said, sometimes if they have baked in too long, they might not be coming out completely, and if they are really baked in, you might need a rotary to get them mostly out.
 
Last edited:
ahhhh! i rubbed a little 2.5 and it removed the specs in no time. For future reference... SSR 2.5 removes SSR 2.5, logic that completely escaped me! Also my water spots arent too severe and they seem to come out with the vinegar. I just dont feel like stripping off my new coat of natty's to take out a few of the others on the hood and stuff. Well im feeling better, thanx again guys...
:dcrules
 
You must log in or register to reply here.
Back
Top