EBPcivicsi
GOT PREP?
After detailing a *very* fould van on Saturday, when this showed up Sunday--I was excited!!!
The car is a 91, third owner car that has been fairly well taken care of.
The swirls were fairly severe, but I could not capture them becasue of the lack of sun. Honestly, it's hard to see any improvement in the pics, but I figured there are some Z fans here, so why not share.
Total time 4.5 hours, the car came to me so that saved me some set up time.
Wash
Clay with Meguiars aggressive clay
Dry
Apply Hi-Temp extreme cut via the rotary polisher @1500 RPMs using a wool pad
Apply Meguiars #83 via rotary polisher and a polishing pad @1000 RPM’s
Apply #80 Meguiars speed glaze via the porter cable polisher @5.5
Apply Meguiars Gold Class liquid wax (new fomula)by hand and a foam applicator
Apply Optimum polymer wax by hand with a microfiber towel.
Chrome wheels polished with NXT metal polysh
All glass was polished One Grand glass pumice via the rotary polisher and 3� spot pad @1000 RPM’s
The interior was:
Vac
Apply APC 10:1(Costco brand) to all carpet, seats, vinyl, etc
Extract carpets and seats LGCM
Dress vinyl with Meguiars hyper dressing 1:1
Wipe down all interior with MF after dressing had set
The engine was degreased with MAGNUM
Pressure washed
Dressed with Eagle One pro water based dressing 1:1
Before:
nO DEPTH, VERY DULL PAINT
The wheels had quite a bit of brake dust and needed to cleaned behind the spokes, I cleaned them with an acid based wheel cleaner before polishing them.
The car is a 91, third owner car that has been fairly well taken care of.
The swirls were fairly severe, but I could not capture them becasue of the lack of sun. Honestly, it's hard to see any improvement in the pics, but I figured there are some Z fans here, so why not share.
Total time 4.5 hours, the car came to me so that saved me some set up time.
Wash
Clay with Meguiars aggressive clay
Dry
Apply Hi-Temp extreme cut via the rotary polisher @1500 RPMs using a wool pad
Apply Meguiars #83 via rotary polisher and a polishing pad @1000 RPM’s
Apply #80 Meguiars speed glaze via the porter cable polisher @5.5
Apply Meguiars Gold Class liquid wax (new fomula)by hand and a foam applicator
Apply Optimum polymer wax by hand with a microfiber towel.
Chrome wheels polished with NXT metal polysh
All glass was polished One Grand glass pumice via the rotary polisher and 3� spot pad @1000 RPM’s
The interior was:
Vac
Apply APC 10:1(Costco brand) to all carpet, seats, vinyl, etc
Extract carpets and seats LGCM
Dress vinyl with Meguiars hyper dressing 1:1
Wipe down all interior with MF after dressing had set
The engine was degreased with MAGNUM
Pressure washed
Dressed with Eagle One pro water based dressing 1:1
Before:
nO DEPTH, VERY DULL PAINT
The wheels had quite a bit of brake dust and needed to cleaned behind the spokes, I cleaned them with an acid based wheel cleaner before polishing them.
