#66 Vs. Fine Finish

2.5RS

2.5RS

New member
Anyone have any experience with both Meg's #66 and Hi-Temps "Fine Finish"? Are they comparable? I've never used either, but was thinking about picking up a good "one step" product that is a little stronger than the ColorX I've been using. Who has opinions/suggestions on these? I've read a bit about the #66 but haven't really been able to find much information about Fine Finish, and since I'm going to order from TOL anyway, I thought I'd find out what I could about it. Does Fine Finish do anything for oxidation like #66 supposedly does?



- Andrew
 
Fine Finish cuts oxidation even if they don't advertise it to, but I'd still go with the 66. It's probably the most aggressive one-step available, and it's a proven winner. Use #66 via pc or rotary (be careful with the rotary, #66 is really good at filling holograms so you've gotta be pretty sure of your technique), remove it with Aquawax or OCW, and you get a great look/polishing + 2 coats of LSP in one quick step.
 
You must log in or register to reply here.
Back
Top