2011 Mini Cooper S - full paint correction and Opti-Guard and CQuartz coating

white gecko

New member
Did this car a little while ago and just now getting some time to post it up. Owner brought this in as a basically brand new car with hardly any miles on it. After having key parts wrapped in satin vinyl and getting clear bra installed on the front end, the task was to fully correct the paint and permanently protect it with Optimum Opti-Guard. The paint, plastics, wheels, and lights would all be coated with Opti-Guard and the glass would be coated with CQuartz.



About 20 hours altogether.



Upon arrival



2012-1.jpg










Swirls on the A-pillar



2019.jpg




2023-1.jpg




2027.jpg




2021.jpg
















Swirls and RIDS (Random Isolated Deep Scratches) seen on the hood



2033-1.jpg




2034.jpg












Some swirls in the clear film that would require some correction



2035.jpg




2036-1.jpg












Spraying the wheels down with Sonax Full Effect Wheel Cleaner, a pH balanced cleaner safe for all wheel types.



2039-1.jpg




2040.jpg












The Mini Daytona Speedmaster Wheel Brush getting the wheel barrels nice and clean.



2041.jpg




2042-1.jpg












Inner barrels looking great



2044-1.jpg














Foaming the car with a mix of Dawn and APC



2045-1.jpg












Using the Swissvax detail brush to clean up the hard to reach areas



2047-1.jpg










Washed, clayed, and ready for taping



2049.jpg














Some cars need just a little taping and some need a lot.....this was the latter.



2050.jpg




2051.jpg












Sorting out the A-Piller



2056.jpg




2059.jpg




2057.jpg




2058-1.jpg














The C-Pillars required extensive correction



2063.jpg




2064-1.jpg




2071-1.jpg




2072.jpg




2074-1.jpg












....other side



2075-1.jpg




2076.jpg




2077.jpg




2079-1.jpg




2080-1.jpg




2081-1.jpg








One more to go



2083.jpg




2084-1.jpg




2085-1.jpg




2087.jpg




2088.jpg




2089-1.jpg




2090.jpg








Correction completed on the roof



2060.jpg




2062.jpg












Lots more taping for correcting the rest of the paint.



2092-1.jpg
 
Door edges and around the handles had clear film as well and was protected via 3M Fine Line 1/4" tape.



2093-1.jpg










2094.jpg




2098-1.jpg




2101.jpg




2104.jpg












Hood fully corrected



2106.jpg










2107.jpg




2108.jpg




2110.jpg














Onto the wheels which needed some decent correction as well...



2113.jpg




2114.jpg










After compounding



2115.jpg




2116.jpg
















Wheel looking much better



2119.jpg










Pain fully corrected



2121.jpg




2123.jpg




2124.jpg




2125.jpg




2127.jpg




2130.jpg




2132.jpg












50/50 of Opti-Guard on the trim



2136.jpg




2137.jpg












Engine tidied up as well



2138.jpg














Finished pics after finishing the coating



2140.jpg




2141.jpg




2143.jpg




2145.jpg










Interior needed little work, but was cleaned up as well



2208.jpg




2204.jpg




2206.jpg














2146.jpg




2147.jpg




2154.jpg




2155.jpg














Opti-Guard gave a great look to the vinyl wrap covering the factory chrome trim.



2158.jpg




2160.jpg




2161.jpg




2162.jpg




2163.jpg




2164.jpg




2165.jpg




2167.jpg




2168.jpg




2170.jpg




2171.jpg




2172.jpg




2173.jpg




2174.jpg




2179.jpg




2180.jpg




2186.jpg




2191.jpg




2194.jpg




2198.jpg




2201.jpg




2152.jpg




2200.jpg










Thanks for checking it out!
 
mikenap said:
Looks great Jeff. I'd like to have seen the 30lb tape ball left behind after you were done!





Don't have a pic of that, but here's one from the GL450 I did. We compressed it as much as we had the strength for....it was SOLID. Could have used it as a baseball!





2306.jpg
 
well done, the finished pics look absolutely stunning. Props on the wheel correction and all the work on the pillars too! That is the stuff that really completes a detail. Opti guard on the vinyl eh? My whole car is wrapped and I have wondered about the out come of doing that. No issues that you experienced?
 
Thanks everyone!



Uber Auto Conditioning said:
well done, the finished pics look absolutely stunning. Props on the wheel correction and all the work on the pillars too! That is the stuff that really completes a detail. Opti guard on the vinyl eh? My whole car is wrapped and I have wondered about the out come of doing that. No issues that you experienced?



Thanks! I've spoken recently with the owner and its still holding up well and haven't had any issues at all.
 
Back
Top