wallyStang
New member
Looks like the dealer induced some swirls in the finish of this 2010 Ford Edge. I did the interior as well but forgot to take pics. Doh :wall.
Regime:
. Washes with Super slick and suds.
. Clayed, using S&W as lubricant
. Re-wash
. Polish with Carnauba BLUE, via porter cable at speed setting 6 for 2 passes applying moderate pressure, I than lowered the speed setting to 5 for the rest of the passes applying only the weight of the machine.
. I had used VC red finishing pad.
. Black Hole by hand.
. Topped with Nattys BLUE.
. Tires received Natural Look x 2
. Trim received NL as well.
First pic was after wash and clay.
Second pic was after PwC B
Third pic was after BH and Nattys Blue
.
Regime:
. Washes with Super slick and suds.
. Clayed, using S&W as lubricant
. Re-wash
. Polish with Carnauba BLUE, via porter cable at speed setting 6 for 2 passes applying moderate pressure, I than lowered the speed setting to 5 for the rest of the passes applying only the weight of the machine.
. I had used VC red finishing pad.
. Black Hole by hand.
. Topped with Nattys BLUE.
. Tires received Natural Look x 2
. Trim received NL as well.
First pic was after wash and clay.
Second pic was after PwC B
Third pic was after BH and Nattys Blue
.
About 8 hours in total. The finish wasn't that bad. I just wanted to use the most least aggressive pad/product to achieve the results.