imported_DJ Mayo
New member
Hey guys, did this RSX a little while ago. It was an interior/exterior detail but these are the only pics I have. The inside wasn't to bad with minor spots. The exterior was pretty rough though. Clay bar took at least 45min-hr alone. The car was full of tar, some yellow paint, and alot of mysterious things around the rear bumper and exhaust. Also this was not a full paint correction. I corrected about 75% after all was done.
Process was:
Wash
Clay
#9 @ 1200-1400 RPM
OPS @ 1000 RPM
# 26 x2 by hand
Windows with spray away glass cleaner. Engine was cleaned with Extreme Degreaser and dressed with Extreme Dress Blues and also spray shine. Sorry for the pics, all I had.
Process was:
Wash
Clay
#9 @ 1200-1400 RPM
OPS @ 1000 RPM
# 26 x2 by hand
Windows with spray away glass cleaner. Engine was cleaned with Extreme Degreaser and dressed with Extreme Dress Blues and also spray shine. Sorry for the pics, all I had.

