Todd03Blown
New member
First off I am not a professional detailer but like to do this as a hobby and relaxation; helps with my stress levels :LOLOL . I have always been a clearkote fan but started reading other posts over here regarding black and Pinnacle Souveran and figured I would give it a try using the Menzerna product lines at the recommendation of "sweating the details". My results are below.
I used:
Poorboys SS&S
Meguiars Burgandy Pad (7006)with the Menzerna IP - PC set at 5
Meguiars Yellow Pad (8006) with the Menzerna FP - PC set at 4
LC grey pad (finishing pad) with the Wolfgang Finish Glaze - PC set at 2
Foam pad that came with Souveran Paste - Only 1 coat so far
I still have some water spots and other deeper scratches that I did not take the time to work out but not sure my PC would do the job either. I would like to end up with a rotary and trying to get them out or going the wet sanding route. I will talk with Mike (sweating the details) to get his expert opinion and see what my options are as well. Thoughts on how this turned out?
I used:
Poorboys SS&S
Meguiars Burgandy Pad (7006)with the Menzerna IP - PC set at 5
Meguiars Yellow Pad (8006) with the Menzerna FP - PC set at 4
LC grey pad (finishing pad) with the Wolfgang Finish Glaze - PC set at 2
Foam pad that came with Souveran Paste - Only 1 coat so far






I still have some water spots and other deeper scratches that I did not take the time to work out but not sure my PC would do the job either. I would like to end up with a rotary and trying to get them out or going the wet sanding route. I will talk with Mike (sweating the details) to get his expert opinion and see what my options are as well. Thoughts on how this turned out?