2.5 and 1 didn't work

I

imported_hss

New member
I used poorboy 2.5 and 1 and pro polish and there where still swirls. I tried some #3 and #80 and it worked. But is there a easier process? Here's some pics
attachment.php
 
Boy you got me on that one. 2.5 is much more aggressive than 3 or 80. The only thing you might have done is fill all the swirls but you probably didn't get rid of them. # 3 and 80 are good products as are 2.5 and PP but 3 is not aggressive for "removing" swirls like SSR 2.5. If you have used 3 and then 80 with nothing on top of it your swirls should start to appear after the first rain or wash.
 
what speed did you work the 2.5 at ? on a PC you need to run it at 5.5 or 6 and work it for a good amount of time to really get the DA's to break down.



Pro Polish doesn't have any abrasives in it and SSR1 is very very gentle -
 
It looks like you may not have worked the product enough. I've gotten much better results with SSR2.5--try to work it until it is clear--the wipe immediately. :nixweiss
 
I used it at speed 4..but dunno if I buff long enought..I will try again...a black car is so hard to do... So with speed set at 5.5 2.5 should remove the swirls off the car?
 
You must log in or register to reply here.
Back
Top