This Tacoma was fairly clean to start with but has the usual swirls from bad washing technique as you can see from pics below. Some deeper RIDS remain but client just wanted a quick AIO and cleanup. Paint was on the medium hardness.
Either way I think it came out pretty good. Not perfect but my goals were accomplished in with what the client wanted. Also instructed him on proper wash technique to keep swirls to a minimum.
I now understand what you guys/gals go through in the west dealing with static in your towels. We`ve had some dry air out of the north yesterday and as I was wiping the residue off, noticed some dust out of the McKees360. Confused the crap out of me. I`ve never had dust from that. Took me awhile to figure it out as we usually have 136% humidity here on the coast. Anyhow, here`s onto the process
Wash: Meg`s Hyperwash 2 bucket method with grit guards
Decon: Griot`s Medium mitt with ONR as lubricant
Wheels/tires/engine bay/trim: McKees APC, Meg`s Hyperdressing 3:1(I ran out of Ultima UTTG!), Speed master brush, Mother`s wheel brush
Polish: McKees 360
Machine: PC 7424XP
Pads: white Lake Country CCS, 5.5" and 6.5”
Didn`t get any before pictures. Morning sun gets hot quick here. This is after a wash and decon
https://photos.app.goo.gl/lh1KplWUmRG20Rey
https://photos.app.goo.gl/MeEg25ZAZSH2fmGH2
https://photos.app.goo.gl/rM241l7E4IIFQVbu1
Defects
https://photos.app.goo.gl/THKWwlNlctyVxXJn1
https://photos.app.goo.gl/JzuR6F3sPgVPi0uj1
https://photos.app.goo.gl/ZPXXbiLgNtQVCtbv1
Dirty pads!!
https://photos.app.goo.gl/pvTT1sovdelprdUp1
Engine bay
https://photos.app.goo.gl/JDrvPzxcQkQNwSlW2
https://photos.app.goo.gl/vmlEddDLFBhiPMXy1
Finished shots
https://photos.app.goo.gl/N1Bkb9uOXYholgwA2
https://photos.app.goo.gl/0KExXVZdh4QoQnmh2
https://photos.app.goo.gl/yTQkcUYlgDhyStmj1
https://photos.app.goo.gl/hJHLZzQSWX5VDvbJ3
https://photos.app.goo.gl/7u2pmOXIvszBn8382
Hope you enjoy! Questions/comments/concerns welcomed!
Either way I think it came out pretty good. Not perfect but my goals were accomplished in with what the client wanted. Also instructed him on proper wash technique to keep swirls to a minimum.
I now understand what you guys/gals go through in the west dealing with static in your towels. We`ve had some dry air out of the north yesterday and as I was wiping the residue off, noticed some dust out of the McKees360. Confused the crap out of me. I`ve never had dust from that. Took me awhile to figure it out as we usually have 136% humidity here on the coast. Anyhow, here`s onto the process
Wash: Meg`s Hyperwash 2 bucket method with grit guards
Decon: Griot`s Medium mitt with ONR as lubricant
Wheels/tires/engine bay/trim: McKees APC, Meg`s Hyperdressing 3:1(I ran out of Ultima UTTG!), Speed master brush, Mother`s wheel brush
Polish: McKees 360
Machine: PC 7424XP
Pads: white Lake Country CCS, 5.5" and 6.5”
Didn`t get any before pictures. Morning sun gets hot quick here. This is after a wash and decon
https://photos.app.goo.gl/lh1KplWUmRG20Rey
https://photos.app.goo.gl/MeEg25ZAZSH2fmGH2
https://photos.app.goo.gl/rM241l7E4IIFQVbu1
Defects
https://photos.app.goo.gl/THKWwlNlctyVxXJn1
https://photos.app.goo.gl/JzuR6F3sPgVPi0uj1
https://photos.app.goo.gl/ZPXXbiLgNtQVCtbv1
Dirty pads!!
https://photos.app.goo.gl/pvTT1sovdelprdUp1
Engine bay
https://photos.app.goo.gl/JDrvPzxcQkQNwSlW2
https://photos.app.goo.gl/vmlEddDLFBhiPMXy1
Finished shots
https://photos.app.goo.gl/N1Bkb9uOXYholgwA2
https://photos.app.goo.gl/0KExXVZdh4QoQnmh2
https://photos.app.goo.gl/yTQkcUYlgDhyStmj1
https://photos.app.goo.gl/hJHLZzQSWX5VDvbJ3
https://photos.app.goo.gl/7u2pmOXIvszBn8382
Hope you enjoy! Questions/comments/concerns welcomed!