106ff speed & amount

[ramhunter24]

Wanted to find out what is the best speed when using 106ff with a PC 7424 with either a White or Orange LC pad? Also, how much do you recommend I put on the pad. Need to remove some swirls / spiderwebbing on a black 300C. :thx

 

[BigJimZ28]

with the PC all correction should be done @ speed 6



as usual start with the white and see if you need the orange

 

[03k20a2]

i use it like any other polish, start at 3 spread around and go to 6 nice and slow passes



get ready for some dust tho but does work amazing

 

[clnfrk]

Don't be surprised if the 106 has only a marginal effect on the marring. It has very little cut and designed to be used as a finishing polish after more aggressive compounding or polishing.

 

[derek37]

Ram, where do you live? I'm in GR

 

[haper]

Don't be surprised if the 106 has only a marginal effect on the marring.

+1, in fact, many use 106FF w/ a gray or blue finishing pad. you might have to get yourself some SIP.

 

[ramhunter24]

Where is the best place / price to get SIP? What pads and speed with SIP?

 

[03k20a2]

a lot of places have it backordeded right now, i have been lookin. anytime you want correction with the PC you have to use speed 6 as stated above by BigJimZ28

 

[KnuckleBuckett]

Orange pad LC or EDGE and SIP. PC at full steam or Flex at mid and then full steam.

 

[Way2SSlow]

Phil at DD has the SIP in stock (atleast he did when I placed my order).