autoconcierge
New member
This car is classified as a "problem child" detail, two plus years of track duty and neglect it was time to retire it of the track as the owner is buying a 430 challenge car foe specific use(thank the heavens).
This car was wrapped by Premier (venture clear film) over the entire car except for the area behind the hoops and the engine decklid,with SEVERE water etch on the film I had a real battle with this job along with filth on every surface of the car inside and out.
WASH
&S citrus hand wash
CLAY: GI fine green clay
WHEELS: GI wheel gel
TIRES:GI signature tire dressing
TRIM: GI TRV
INTERIOR: GI interior cleaner
LEATHER: GI satin leather polish
CORRECTION
Vinegar wipe down, followed by heat gun treatment and CG water spot treatment
POLISH: combo of GI evo cut and Menzerna PO85RD with GI EVP pad prime with rotary and Festool DA on highest setting
Painted areas needed wool pad correction with Megs 105 and EVP followed with GI evo cut and GI fast cut foam, then finish polishing with combo of GI evo polish and EVP and PO85RD, then CG acrylic glaze with the Flex DA and GI 100ppi finish foam pad
The "before pics" oh yah this was going to be fun
Look at the water spots here I almost cried when I opened the engine decklid
Interior pics before
The gel doing work
Painted areas thru the correction steps
After 105 and grey wool
Foam pad step
Ready for fine polishing
Example of water spots on the film
Corrected(after much effort)
Rember the water spots on the decklid?? all gone
Engine tightened up
the rear window was in need of some slight correction:faint:
50/50 shot
finished product
Where the car lives, nice digs............understatement
After interior pics
This car was wrapped by Premier (venture clear film) over the entire car except for the area behind the hoops and the engine decklid,with SEVERE water etch on the film I had a real battle with this job along with filth on every surface of the car inside and out.
WASH
&S citrus hand washCLAY: GI fine green clay
WHEELS: GI wheel gel
TIRES:GI signature tire dressing
TRIM: GI TRV
INTERIOR: GI interior cleaner
LEATHER: GI satin leather polish
CORRECTION
Vinegar wipe down, followed by heat gun treatment and CG water spot treatment
POLISH: combo of GI evo cut and Menzerna PO85RD with GI EVP pad prime with rotary and Festool DA on highest setting
Painted areas needed wool pad correction with Megs 105 and EVP followed with GI evo cut and GI fast cut foam, then finish polishing with combo of GI evo polish and EVP and PO85RD, then CG acrylic glaze with the Flex DA and GI 100ppi finish foam pad
The "before pics" oh yah this was going to be fun
Look at the water spots here I almost cried when I opened the engine decklid
Interior pics before
The gel doing work
Painted areas thru the correction steps
After 105 and grey wool
Foam pad step
Ready for fine polishing
Example of water spots on the film
Corrected(after much effort)
Rember the water spots on the decklid?? all gone
Engine tightened up
the rear window was in need of some slight correction:faint:
50/50 shot
finished product
Where the car lives, nice digs............understatement
After interior pics
