I have talked to a customer from nasioc about doing a one step polish/exterior detail on his 04 wrx. When I got there in the am I inspected the car and realized there were quite few RIDS, and heavy swirling. so I recomended him to do a 2 step inn order to bring the paint back to a high gloss. the only problem is that he was working from 9 to 5h30pm and this was the only time I would get for all the work (including a quick interior detail:vacuum, wipe down etc.).
Product used:
ONR wash
p21 taw/wheel
CG window
CG pruple clay
meg mild clay
DP clay lube
CG fade to black
CG GR
makita
LC ccs orange, white, red+PWF
Menz SIP+106
pinacle souverain
After the onr wash:
wheels clean:
under the ligths you can see quite a few rids and swirls:
I was in a hurry so I didn't have time to take a lot of pics but here
is 50/50 after one pass of orange/SIP I didn't wipe all the polish residue
The hood befor and after one pass PWF/SIP few holograms most swirls are gone
Door panel after 106/white final inspection:
Product used:
ONR wash
p21 taw/wheel
CG window
CG pruple clay
meg mild clay
DP clay lube
CG fade to black
CG GR
makita
LC ccs orange, white, red+PWF
Menz SIP+106
pinacle souverain
After the onr wash:


wheels clean:

under the ligths you can see quite a few rids and swirls:

I was in a hurry so I didn't have time to take a lot of pics but here
is 50/50 after one pass of orange/SIP I didn't wipe all the polish residue

The hood befor and after one pass PWF/SIP few holograms most swirls are gone


Door panel after 106/white final inspection:
