EXP & Natty ? how many coat?

B

bored7one4

New member
after i go over my whole car with ssr1, i want to apply exp and natty but i dont know how many coats to put on and the cure time between each coats for each product.

thanks
 
I usually put one coat of sealant and 2-3 coats of wax on my vehicle. The cure time for the sealant is about 24 hours. Try to keep it out of the rain for that time also. For Natty's you can apply coat after coat without a cure time in between.
 
bored7one4 said:
after i go over my whole car with ssr1, i want to apply exp and natty but i dont know how many coats to put on and the cure time between each coats for each product.

thanks
Click to expand...
I'm not one for all the "coats" of product, but that's just me.
I do two applications of my LSP, but it is basically to assure complete coverage. Hopefully, I wouldn't miss the same places both times. :)
Sealants, I would wait 24 hours between applications or whatever the product instructions say to do.
I also don't get into the "topping" of sealants with a wax, but if I did, the same two applications for coverage would be my procedure. I would probably wait a day between wax applications, but I have no information that says that would be necessary. It just seems like the first application should have some time to fully cure.
:dunno:

Charles
 
Stephan said:
yes exactly...I probably should have said that...
Click to expand...

No worries :)

Bored7one4 you can layer sealants and then top with as many coats of wax that you want (when the sealant cures), just put wax on, or you can just use the sealant and not put on the wax like Charles it is really what you think looks the best give them all a try and see what you like better. :bigups
 
Pockets said:
No worries :)

Bored7one4 you can layer sealants and then top with as many coats of wax that you want (when the sealant cures), just put wax on, or you can just use the sealant and not put on the wax like Charles it is really what you think looks the best give them all a try and see what you like better. :bigups
Click to expand...


my oh my the boy has been paying attention:rockon

bored7one4 said:
after i go over my whole car with ssr1, i want to apply exp and natty but i dont know how many coats to put on and the cure time between each coats for each product.

thanks
Click to expand...

Well this would be my plan , after the SSR1, then like Charles said, go over the car twice..make sure the coats are really thin and hard to see. After the two consecutive coats to ensure total coverage, try and keep the car dry for 24-72 hours...sealants like to cure for best durability ...then you can put on a couple coats of Natty's and then do additional coats as needed .:) For expert advice on multiple layering or wax or sealants, contact rabbi he's a master of the art :notme::D
 
You must log in or register to reply here.
Back
Top