My process

rayoto

rayoto

Nice and Cool
I'm detailing a metallic blue Beemer this weekend and wanted to make sure I've got my process down before I begin: The paint is in good shape with only minor/light swirls: The order-

Wash-(2 bucket)
Clay- (Clay Magic)
SSR1- (White Pad)
Optimum Poli-seal-(Not sure??)
Wolfgang Deep Gloss Sealant- (Hand)
Nattys Blue- (Hand)

I've read about cure times for sealant, will this apply here?

Ray:cheers:
 
I would leave the Poli-Seal out of the equation. You don't need two different sealants on there. The rest looks good.
 
if you want the durability from the sealant, then it should be left to cure for 24-72 hours before topping with the Natty's blue ...if you are only shooting for looks , then an hour or two should do:)
 
You can ditch the poli seal if you are going to use WG...over kill is what they is

Since there is a cure time for most all sealants, and the WG sealant is a real high gloss product its one of my fav's I would stop with that...if you could wait 24 hours for a full cure then topping with Nattys would be the best of both worlds...however the WG will leave the car looking like a million bucks....its a beemer after all:bow

The rest of your process is spot on!!
 
You must log in or register to reply here.
Back
Top