Ronkh
Wax Waster
Hmmmmmk
What did you do detailing wise today?
- Thread starter Bunky
- Start date
512detail
New member
I thought you`d appreciate using the whole 4 ounces
Sent from my SM-G900P using Tapatalk
512detail
New member
PWS + LNB
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
Ronkh
Wax Waster
Bunky
Detailing Gnosis
I cleaned up my MKZ...
1. Rinseless wash with Blackfire Rinseless and ONR (not enough of BF to get 4 gallons)
2. Cleaned jambs with CG V7
3. Cleaned glass with Sprayway
4. Cleaned tires with Mothers Back to Black Tire Renew
5. Cleaned wheels with Mothers All Chrome Cleaner - nice for rinseless washes
6. Wiped down interior with CG Inner Clean - nice except for scent
7. Cleaned coated seats with CG Nonsense - a first time test
8. Protected seats with Mothers Leather Clean - leaves a nice looking non-slick finish compared to most other products/protectants
Of course, it rained about 5 minutes today to leave spots on it.
1. Rinseless wash with Blackfire Rinseless and ONR (not enough of BF to get 4 gallons)
2. Cleaned jambs with CG V7
3. Cleaned glass with Sprayway
4. Cleaned tires with Mothers Back to Black Tire Renew
5. Cleaned wheels with Mothers All Chrome Cleaner - nice for rinseless washes
6. Wiped down interior with CG Inner Clean - nice except for scent
7. Cleaned coated seats with CG Nonsense - a first time test
8. Protected seats with Mothers Leather Clean - leaves a nice looking non-slick finish compared to most other products/protectants
Of course, it rained about 5 minutes today to leave spots on it.
Mary B
New member
Used my new Foamgun for first time on my `14 Dark grey Nissan Rogue daily with some HD Wash, that stuff is thick! (didn`t click the end in properly water shot the plastic piece out like a bullit bounced off the truck
HD cleaned well with lotsa suds & slick shine.
First I sprayed then cleaned wells & wheels with CG`s Nonsense, wheels came out nice but I have clay or somethin` other then mud packed in the wells, put Nanoskin Speedshine on the tires, really like the Speedshine. CG`s VRP on the trim, bumper step has some color fade so will be trying many trim products.
CG`s Innerclean on interior.
Oh forgot I used PB`s Bugsquash for bugs with a LC bug spounge plus used as a pre cleaner.
All I had time for, MUST Polish this truck soon.
HD cleaned well with lotsa suds & slick shine.
First I sprayed then cleaned wells & wheels with CG`s Nonsense, wheels came out nice but I have clay or somethin` other then mud packed in the wells, put Nanoskin Speedshine on the tires, really like the Speedshine. CG`s VRP on the trim, bumper step has some color fade so will be trying many trim products.
CG`s Innerclean on interior.
Oh forgot I used PB`s Bugsquash for bugs with a LC bug spounge plus used as a pre cleaner.
All I had time for, MUST Polish this truck soon.
512detail
New member
After two cars in a row my garage looks like a 5 year old on a sugar high was left in there for three days, lol.
I find products migrating from my bedroom storage to the garage again..hmm
Shame on me. I am organizing right now.
Sent from my SM-G900P using Tapatalk
I find products migrating from my bedroom storage to the garage again..hmm
Shame on me. I am organizing right now.
Sent from my SM-G900P using Tapatalk
donbeezy
New member
nickclark08
New member
donbeezy
New member
lol probably. buddy just picked up a 99 civic hatchback and I did a quick test spot to see. lots of deep scratches leftover. may wetsand it instead when he`s ready.
mnehls86
New member
CR-V needed a wash so bad. Broke my foot a few weeks ago so I have been a little cautious of getting up on the ladder or even walking around without my boot. It has been driving me nuts for the past couple weeks so yesterday was the day. Neighbors probably thought I was nuts seeing the clouds in the sky but in So Cal dark clouds are never a guarantee for rain and luckily for me it didn`t. Foamed with PB SS&S, 2BM wash with Blackfire Wet Diamond Conditioning Shampoo and Megs Quik Detailer as drying aid.
Attachments
RaysWay
Autopia Specialist
Tested Kenotek Showroom Shine and it passed with flying colors.
Now I`m looking forward to testing the rest of the line.
Now I`m looking forward to testing the rest of the line.
512detail
New member
Might of had some Poorboy`s beta foam left
Wanted to see how it plays with several layers of Natty`s
2nd (bonus) review coming soon
Sent from my SM-G900P using Tapatalk
Wanted to see how it plays with several layers of Natty`s
2nd (bonus) review coming soon
Sent from my SM-G900P using Tapatalk
Mary B
New member
Tried out PB`s Ex sealant on my Nissan Rogue, using a Torq10 on it. That truck has only been done by hand and it was SWEET finally using a machine. Gave me confidence enough to do some much needed correction when time permits. Then I headed off to Home Depot for some quick connects to go with the Gilmour set from DI to use with my new Foam gun & a new cool triggerless gun for rinsing.
Mary B
New member
Lease almost up was afraid to machine her She will get corrected soon. I`m waiting on my sale items
sent from me
She will get corrected soon. I`m waiting on my sale items
sent from me
RaysWay
Autopia Specialist
Lease almost up was afraid to machine her
sent from me
I saw your review on "The Hose Slide" this morning and I love those things too. I actually met the family who invented that tool at SEMA a few years ago and I`m happy to see it get good reviews. I only have a 2 pack but reading your review made me grab another 2 pack for this weekend
RDKC
New member
This was actually from the weekend before last, but I was going through pictures and forgot I snapped this one.
I wish I had some after photos of the truck when I was done. It really needed a full correction and the passenger`s side still had plenty of scratches from him driving through trees/shrubs but the Speed did a surprising bit of improvement. The paint was horrible.
So, what did I do today? Looked at/resized photos.
This is what it looked like around most of the truck.
Same panel as the first picture.
The one for fun. ^_^
I wish I had some after photos of the truck when I was done. It really needed a full correction and the passenger`s side still had plenty of scratches from him driving through trees/shrubs but the Speed did a surprising bit of improvement. The paint was horrible.
So, what did I do today? Looked at/resized photos.
This is what it looked like around most of the truck.
Same panel as the first picture.
The one for fun. ^_^
Attachments
Mary B
New member
Today I placed orders for Memday sale. Plan is to work on clay packed wheel wells with strong APC and spoke brush because it`s rounded, ordered 3D Dress for wells, Solution Finish for faded trim. Now to get the weekend off !??
Ronkh
Wax Waster
Play time:
83 degrees with a real feel of 94. Sun is HOT
and for those that remember this story:
Merlin shot:
83 degrees with a real feel of 94. Sun is HOT
and for those that remember this story:
Merlin shot:
donbeezy
New member
u missed a spot