HD Speed vs Poorboy's PWS 9polish w/ sealant)
- Thread starter ShawnF350
- Start date
Accumulator
Well-known member
Q: isn't that half-bottle enough to last for a pretty long time?
I used it on all my fall customers cars.
So probably will only last a bit longer.
Cmon I need a reason to get another bottle of something too. B)
WaxAddict
New member
Did you try PWS on really soft paint? I could not get PWS to finish optically pure on one of the three cars I tried it on.
Every car I did turned out really well.
A bunch of Fords. A few Toyotas.
A Lexus I did looked awesome but it didn't remove water spots. I'll try to remove them this time around. Might have to do a more aggressive polish first.
I'm not too experienced in determining whether the paint is soft or hard. I used the white LC flat if I felt it needed a little extra. I didn't want to use an orange pad since I wasn't correcting much.
A bunch of Fords. A few Toyotas.
A Lexus I did looked awesome but it didn't remove water spots. I'll try to remove them this time around. Might have to do a more aggressive polish first.
I'm not too experienced in determining whether the paint is soft or hard. I used the white LC flat if I felt it needed a little extra. I didn't want to use an orange pad since I wasn't correcting much.
Ben@3D
New member
You may want to try a dedicated Water Spot Remover like 3D Eraser that removes them chemically instead of a polish that does it mechanically.