Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Zaino ZFX Question
- Thread starter 2007TBSS
- Start date
2007TBSS said:If I were to do 2 coats of Z-5 and top it off with a coat of Z-2 in the same day, would I need to put any ZFX in the Z-2 or just the Z-5?:think:
put the ZFX in every coat the Z5 and Z2
You are right, you don't *have* to use ZFX on the Z-2 coat *UNLESS* you plan to do more than one coat of it THAT day. But I think Zaino recommends no more than 3 coats per day even with ZFX enabled Z5/Z2. You WILL have to wait up to 24 hours (suggested time) before applying any more coats, ZFX or not though.
Yeah, I have a friend that has a bright red Honda, and I figured I would go ahead and throw 3 coats on it while I had it. I have heard awesome stuff about 2 layers Z-5 and a finish coat of Z-2 to seal the deal. So I will disperse Z-5 and mix the ZFX and apply 2 coats, but when I switch to the Z2, I wondered if I needed to give it a few drops of ZFX or not.
I know that if I am stacking layers on the same day, I have to use the ZFX, but I wondered if it was only for the coats to be covered with a subsequent coat or if ALL coats applied in the same day need to be ZFX enabled.
I know that if I am stacking layers on the same day, I have to use the ZFX, but I wondered if it was only for the coats to be covered with a subsequent coat or if ALL coats applied in the same day need to be ZFX enabled.
ZFX just helps it cure quicker so you can layer multiple times in a day. The last coat of the day (or week, or whatever) doesn't need ZFX because you're done with it for the time being. I asked this very same question ages ago because it made no sense to me to have to mix up another small batch of ZFX enabled Z2 to do a final coat.