Zaino with PC

4

40thgto

New member
I could have swore I read a post a few weeks back from someone who used Zaino with a PC, and got even better results. I searched for the post, but could not find. Does anyone have this link or any advice? I realize Zaino is not an abrasive, but this guy said for some reason he got way better results when using Zaino with the PC.



Thanks
 
I put on 1 coat of zfx z3 last week with my PC. Somehow I forgot to moisten the pad so it soaked up all the zaino... ended up using 1.8 ounces for 1 coat lol. But it was my first time using the PC and all I kept thinking about was "don't let the pad run dry" like I read about here... I'll try to get 3 coats out of an ounce this time. ;)



I don't see how you can do it very well without some good indoor lighting tho... I'm forced to do it outside in the sun so it may be kinda hard to see the layers going on... but I'll try.
 
You kind of have to apply Zaino by machine in a systematic way. It's very hard to see (especially Z2, I can see Z5 pretty well), but if you do it carefully and be sure to get every spot you'll know it's there. I like to apply 1 mist of Z6, spin the PC at 6 for about 30 sec, then apply a circle of Z around the edge of the pad and an X through the middle to start. Then just a few tiny drops from my syringe are needed to refresh the pad for each panel. Using the same pad for each coat allows you to avoid the starting application of Z since the pad is already saturated from previous coats (assuming quickly drying coats with ZFX, of course).
 
You must log in or register to reply here.
Back
Top