Zaino Slickness?

2

2clean4u

New member
Here is my situation. I decided to try Zaino. I tried it on my sisters blue Honda Civic. These are the steps :

1. Dawn washed

2. Clayed

3. 1 coat of z5 with zfx

4. 2 coats of z2 with zfx

5. Z6 between each coat



The shine was excellent! It made the metalic flakes stand out. I was disappointed with the slickness. It didnt feel very slick. I have read how Zaino offers the best "slick finish"

Did I do something wrong? Did I get a bad batch of Zaino? It just felt like normal wax. I was expecting Zaino to be very slick. I followed the dirrections. waited for it to dry. Used 100% U.S. cotton towels. Used z6 between coats. I even let it sit in the sun to "Bake". I was expecting it to be slicker than the raindance that I used back in the 80's



Thanks for the help!



Frank
 
I would have done the Dawn wash AFTER I clayed to ensure there was no clay residue left on the surface. You may have some clay residue that either didn't allow the Z to bond correctly or is just adding friction to the surface. Zaino is very slick, and it stays that way for good long time. :wavey
 
laynlow said:
I would have done the Dawn wash AFTER I clayed to ensure there was no clay residue left on the surface. You may have some clay residue that either didn't allow the Z to bond correctly or is just adding friction to the surface. Zaino is very slick, and it stays that way for good long time.
Click to expand...



yep what he said

:xyxthumbs
 
Fskof said:
Here is my situation. I decided to try Zaino. I tried it on my sisters blue Honda Civic. These are the steps :

1. Dawn washed

2. Clayed

3. 1 coat of z5 with zfx

4. 2 coats of z2 with zfx

5. Z6 between each coat



The shine was excellent! It made the metalic flakes stand out. I was disappointed with the slickness. It didnt feel very slick. I have read how Zaino offers the best "slick finish"

Did I do something wrong? Did I get a bad batch of Zaino? It just felt like normal wax. I was expecting Zaino to be very slick. I followed the dirrections. waited for it to dry. Used 100% U.S. cotton towels. Used z6 between coats. I even let it sit in the sun to "Bake". I was expecting it to be slicker than the raindance that I used back in the 80's



Thanks for the help!



Frank
Click to expand...



The same thing happened to me, my tips are.



When i felt it at first it wasnt slick, william420 then said check it in the morning when my hands arent all sweaty and clammy from detailing, yep he was right, super slick. Next thing, i let my car sit in the sun for a few hours after detailing, the zaino became even slicker. try it
 
Its been a week since I wax it. I thought it might need time for it to bond. I'm sorry I forgot to say that I did washed with Dawn after the clay. My fault. The car does have a very nice shine. I'm thinking of adding a layer of z2 with out the zfx and see if that makes the difference.





Frank
 
If it aint slick there is something wrong!!!! Is the paint SMOOTH prior to zainoing? Zaino wont polish the paint SMOOTH...but will make it slick........
 
Yes the paint is very smoth before appling zaino. I am not dissapointed with the shine. This is the best I have ever seen this car shine. I will try a layer of z2 without zfx to see wehat kind of results I get









Frank
 
I agree with DK! I finish up with the Z6, and it's the slickest finish I've ever felt.



Hope you get it worked out!
 
DETAILKING said:
If it aint slick there is something wrong!!!! Is the paint SMOOTH prior to zainoing? Zaino wont polish the paint SMOOTH...but will make it slick........
Click to expand...



DK hit the nail on the head. :xyxthumbs

Z6 is necessary for that great slickness Zaino is famous for. Some say that Z6 is optional but I believe it is necessary for the complete effect of Zaino polishes. It may seem a little expensive but a little goes a long way. Also look into the Z7 car wash. This also augments the system and you will not believe how it actually improves the shine. :cool:
 
You must log in or register to reply here.
Back
Top