Yesterday I used Menzerna IP & FPII on my car and toady I was going to follow it up with Zaino. I have Z1, Z2, and Z5. I know to use Z1 first, but directly after using Z1 can I use Z5 or Z2? I still have a fair amount of scratches on the car, should I use Z5? If so how long do I leave it on before applying Z2? Thanks!
Zaino Help
- Thread starter 6speedZ
- Start date
First if you still have scratches, Zaino Z5 will not hide them very well if at all.You would be wise to get rid of them first if you can or just live with them if there too deep for removal.
Second if you use Z1 instead of ZFX you can only do 1 coat in lets say 24 hours whether it's Z2 or Z5 it doesn't matter.You can layer them in any order you want, just 1 coat at a time unless you wan't to spring for the ZFX, then you can layer 3 coats in a day.
Second if you use Z1 instead of ZFX you can only do 1 coat in lets say 24 hours whether it's Z2 or Z5 it doesn't matter.You can layer them in any order you want, just 1 coat at a time unless you wan't to spring for the ZFX, then you can layer 3 coats in a day.
imported_Jinba ittai
New member
If you have minor swirls, cobwebs the Z5 will help fill them in but actual scratches will have to be addressed with something that can take them out. Z5 is a filler, not an actual polish.
If you use Z1 you can only put one coat on every 24 hours. If it's cold or humid it might be a good idea to wait even longer, especially since you'll be putting Z1 along with either Z5 or Z2. Too much Zaino in a short period of time isn't necessarily a good thing. All you'll do is cause it to smear/streak. If you use ZFX this isn't a problem.
I'd advise trying the Z5 first and then if you'd like, top with a coat of Z2-Pro. You want your Z2 to be the last coat if you are putting on multiple coats.
If you use Z1 you can only put one coat on every 24 hours. If it's cold or humid it might be a good idea to wait even longer, especially since you'll be putting Z1 along with either Z5 or Z2. Too much Zaino in a short period of time isn't necessarily a good thing. All you'll do is cause it to smear/streak. If you use ZFX this isn't a problem.
I'd advise trying the Z5 first and then if you'd like, top with a coat of Z2-Pro. You want your Z2 to be the last coat if you are putting on multiple coats.
imported_Burlyq
New member
Don't wipe off the z1, put the Z2 over the Z1, then remove.
imported_Jinba ittai
New member
Everything you need to know about Zaino but were afraid to ask. 