Hey everyone. This past weekend I had a chance to work on a Yellow Rumble bee. This truck is the owners pride and Joy and is very picky. To begin with the truck looked clean but upon a closer inspection you can see the swirls.
Here is the truck before the wash
After I rinsed down the truck I realized it had a decent coat of wax
After washing with TAW I took another look at the swirls and they stood out a bit more
Door jambs and lower rubber gasket were cleaned up as well using TAW
What worked best for me was M105 on a LC orange pad and rotory
P21s gel on the wheels followed by a coat of NXT 2.0 wax
Before
after
and finally with a coat of Meguiars #26 wax
Some glamour shots
After about 15 hours I was seeing black & yellow. It was alot of paint to cover but all in all I had a blast.
M105 on rotory with orange LC pad
M205 on G110 on megs W-9006
Megs #26 wax
Megs #40 on all rubber gaskets
Hyperdressing on wheel arches
Insane shine rubbed into tires to give it a matte look
Thanks all for looking.
Here is the truck before the wash
After I rinsed down the truck I realized it had a decent coat of wax
After washing with TAW I took another look at the swirls and they stood out a bit more
Door jambs and lower rubber gasket were cleaned up as well using TAW
What worked best for me was M105 on a LC orange pad and rotory
P21s gel on the wheels followed by a coat of NXT 2.0 wax
Before
after
and finally with a coat of Meguiars #26 wax
Some glamour shots
After about 15 hours I was seeing black & yellow. It was alot of paint to cover but all in all I had a blast.
M105 on rotory with orange LC pad
M205 on G110 on megs W-9006
Megs #26 wax
Megs #40 on all rubber gaskets
Hyperdressing on wheel arches
Insane shine rubbed into tires to give it a matte look
Thanks all for looking.
