Who here use's the Surbuf pads.

superchargedg

superchargedg

Twin Turbos
Just wondering who here uses these pads and what succses you are having with them.I actually like them after trying them last year with menz SIP and 106ff and was able to finish down pretty darn well with them on my Flex 3401.



I purposley introduced minor swirls on my car this winter to see how they will do with some M205 as a light cutting polish......but if that dosent work out comes the SIP.
 
If you're gonna use the SurBufs with something mild, for less-than-aggressive work, be careful that you don't deflect/bend the "fingers" too much. I messed up the Jag with a *very* mild product via SurBufs and I suspect that's what the problem was.
 
I tried the SurBuf with a R/O and System One on the hood of my car recently. The method outlined by GMBlack3a was used. Results were satisfactory. Two passes produced a slight haze which was then buffed to nice gloss using a fine foam pad. Not sure I would use this method all the time.
 
Blinky said:
I tried the SurBuf with a R/O and System One on the hood of my car recently. The method outlined by GMBlack3a was used. Results were satisfactory. Two passes produced a slight haze which was then buffed to nice gloss using a fine foam pad. Not sure I would use this method all the time.
Click to expand...



What kind of defects did your hood have?
 
I love the Surbuf & M105 combo for defects that seem to be on the the edge of needing sanding and on soft paints for defects that would normally need a little sanding.

it has surprised me many times and save me a lot of time!
 
You must log in or register to reply here.
Back
Top