What's everyone planning on using for the winter?

S

stilez

New member
As I sit here and make a list of projects I have to do for my car before the cold season fully arrives, one that sparks in my memory is what to use (detailing wise) to prep my car for the winter. I'll start:





-Optimum Clay

-Optimum Polish via rotary and LC Polishing Pad @ 1200 rpm

-Menzerna PO85RD via rotary and LC Finishing Pad @ 1500 rpm

-4* UPP x 3-4

-FK1 Pink Wax every month or so





-Black trim will be cleaned with GR-40 then sealed with the GR plastic clearcoat

-Respray wheel well padding (rubber stuff in a bottle) in the rear wells

-Polish exhaust and seal with Zaino







Your turn...
 
Already did the wife mobile with #21, mine will get #80 via PC, then #21. I plan to just QD after my washes to maintain.
 
I've decided to go with Zaino for this winter, which is the first time in a few years that I've done so. My primary reasoning was the introduction of Z8. I've found, through testing during the summer, that Z8 even by itself applied to a fresh surface has 1-2 weeks of durability as a sealant. Since it's as easy as QD to use/apply, I figure that my current solution of 6 coats of Z2Pro/ZFX over a freshly ZPCed finish, will provide plenty of durability when coupled with a shot of Z8 after washing.
 
GSRstilez said:
-Respray wheel well padding (rubber stuff in a bottle) in the rear wells
Click to expand...

^^ what is this stuff?



my plans...

prep with Optimum

finish with FMJ x 2-3

maintain with OCW

GR-40 trim, unsure what to seal with...

303 weather seals around windows, trunk, and bonnet

put my beater wheels and tires back on

unsure yet on what to use on my Prodrive exhaust...
 
Here's what I'm planning at the moment.



-Clay to clean off the current pile of products.

-Polish. Optimum on the Car, FPII on the Truck

-FK #2180 x 2 on the truck.

-UPP x 2, OCW x 1 on the car.

-#2180 for the jams on both.

-Clay & PB's wheel sealer x 2 for the wheels & exhaust on both & the painted bumpers & side steps on the truck.

-AIO on the glass for both.

-PB's leather cleaner/conditioner for the seals on both.

-FX-100 and #425 to maintain the truck

-#OCW & S&G to maintain the car.



I'll be using a bug squash as a pre-wash soak to lift the lovely winter grime before I marr up the finish with a wash mitt :)





It's supposed to rain all weekend again in the NE, so I'll probably get this underway in the garage for something to do.



My carnuba's are going away for the winter, and will be back next spring.
 
I did my wheels today with a coat of Hyperturismo's Wheel Wax. As far as the paint goes, I'm having bit of a Meguiar's revival at the moment so I'm going to go:



#80

#82

#7

#21(x2)



I'll either re-apply #21 when I feel the need, or switch to #16 as a durable winter topper. Rubber seals will get some #38 when I get round to getting some.



Ben
 
Next week is vacation time... I am going to put Collinite 845 on all three of mine as an LSP. OCP with a polishing pad after washing, claying, pulling the wheels, etc.
 
I finished up winterizing my 2005 black tacoma earlier this week. I know I talk up CG all the time, but Zaino remains my winter products of choice. I washed with Z7,clayed,washed again,Z6'd,Z5 w/ZFX x 3,Z2 Pro w/ZFX x 5 then topped with Z8. The "BlkTac05" looks deliciously lickable!!
 
GSRstilez said:
FujiFast: I forget the name but it an aerosol can that sprays rubber/plastic lining for your fender wells. I got it at Ace Hardware.
Click to expand...

hey sean, can you check the name of the product when you get a chance? it sounds like something i'd like to try this winter...especially with all the excessive salt boston uses :xyxthumbs
 
I did my daily driver a few weeks ago it got:



-Menzerna Powergloss Via Rotary w/ Wool Pad 1500RPM (mind you I just got this thing awhile ago and this was the first proper detail on it)

-Opt. Polish Via Rotary w/ LC Light Cutting Pad 1200-1500RPM

-Jeff Werkstatt Prime Via PC w/ LC Polishing Pad

-4X Jeff Werkstatt Acrylic Jett by hand

-Pinnacle Sig. By hand to top her off...
 
Well here in Cali I still generally have at least one day every week where there is enough sun to make it warm enough to wash. Sometimes it's even warm enough to do a full detail. But around November, I am going to strip off the UPP, clay, and polish it out with SSR2.5 + AIO. I just used SSR2.5 2 weeks ago so I may good with just a little SSR1 + AIO.



Then I'll probably throw on 2 coats of UPP, and maintain it weekly (or as weather permits) with TOL Bubble Wash. Every 2-3 weeks I'm going to use OCW after a wash.



I haven't decided what to do with the other vehicles. Maybe UPP + Natty's Blue or #16.
 
My wife new Silver Mercedes gets AIO topped with WG, WAUD when it looses some slickness, Reapeat WG after 3 months. My Red 911 gets 1ZMPP, WG, topped monthly with S100. My white SUV daily driver gets #80, #21, WAUD to keep it up.
 
All polished ready so.



AIO, AG EGP x3, Top with Nattys Blue and Maintain weekly after washing with OCW here.
 
You must log in or register to reply here.
Back
Top