Using a PC in small areas? (Spoilers, near windows, etc.)

M

motobuild

New member
Question-



So to remove swirls in small areas what's the best method? I've read that when using a PC to polish it needs to be kept flat so polish won't go every where. However, I am assuming that when I polish my spoiler, doors near the windows, and near the sunroof the Porter-Cable won't be completley flat since these areas are smaller than the pad.



Should I do these areas by hand? Or what's the best method? There's a lot of micro-abrasions that I want to get rid of in these areas. Hell, the whole car is one giant micro-abrasion. ;)



Thanks!
 
Hi Tusin,



:LOLOL





You could try using a 4" pad for the PC for the tigher areas. And any areas to small for a 4" pad then yes hand application is a must.



With Aloha,

Ranney :)
 
Thanks.



I knew it was a pretty dumb question...but I figured I would ask. I know that getting swirls and scratches are harder to get out by hand.



I'm a newb. ;)
 
Hi Tusin,



It wasn't a dumb question. It was actually a smart question. The reason, I used the LOL smilie was because of this...



"Hell, the whole car is one giant micro-abrasion"



Thanks for the laugh.



With Aloha,

Ranney :)
 
there is a double sided pad with no backing plate that can help you get in smaller areas like under spoilers and stuff without hitting anything.
 
Tusin,



You can also get a 3.5" backing plate and 4" pads from the Autopia store (click "shop!" at the top of the page). The smaller size makes doing pillars, spoilers, and bumpers less of a hassle . . .



Tort
 
My mistake; I thought I'd ordered mine from the Autopia store, but now I recall that the small backing plate and pads were a X-mas gift from my parents, and that I pointed them to CMA (properautocare.com) back then as a source.



Sorry for any confusion,

Tort
 
I generally use *larger* pads, rather than smaller, to get into tight spots. For me, it's usually the head of the polisher that gets in the way, so a larger pad lets me slip the pad into tight spots without bumping things with the head of the polisher. Also, with a larger pad you have options like using the edge of the pad (much easier than with a small pad). I do like the 4" pads for spot repairs, though.



Oh, and I too got my 3.5" flex backing plate from CMA.
 
You must log in or register to reply here.
Back
Top