Hello Everyone,
I own a Black Silverado which I baby almost everyday except for the winter months.
It has Rail and liftgate Caps, and I'm looking for some help in keeping these items clean and stopping them from fading if its possible.
I usually use the painters blue tape before I apply any wax or sealants, to the paint. 1 Coat every other day weekdays only, Wife gets me on weekends.
Here is what i have tried already..
Wax Blaster, mothers Back to Black, Black again, Meguiar?s Vinyl & Rubber Cleaner & Protectant, Klasse AIO, ArmorAll.
Non of the above works, actually they do and then the next day its back the way it was, and if thats not bad enough, I rinse the vehicle everyday if the temp is above 50F, and some of the above mentioned items run down onto the paint, and OMG try taking that off, especially Mothers Back to Black.
One day i didnt rinse and the next day it rained oh Geeez. But i did find a way to take the stuff off, Simple Green!
So i purchased Forever Black Bumper & Trim Dye Kit to apply.
Unless someone here knows how i can solve this problem.
Replacing the covers is not an option unless there is no otherway, only because I will have to remove the Roll&Lock Cover off the bed.
I was looking for someone to custom fabricate a tailgate cap out of Black plexiglass, but i cant find a place or a person that can.
Any help or suggestions on cleaning the caps would be great.
Thanx In Advance
Claude
I own a Black Silverado which I baby almost everyday except for the winter months.
It has Rail and liftgate Caps, and I'm looking for some help in keeping these items clean and stopping them from fading if its possible.
I usually use the painters blue tape before I apply any wax or sealants, to the paint. 1 Coat every other day weekdays only, Wife gets me on weekends.
Here is what i have tried already..
Wax Blaster, mothers Back to Black, Black again, Meguiar?s Vinyl & Rubber Cleaner & Protectant, Klasse AIO, ArmorAll.
Non of the above works, actually they do and then the next day its back the way it was, and if thats not bad enough, I rinse the vehicle everyday if the temp is above 50F, and some of the above mentioned items run down onto the paint, and OMG try taking that off, especially Mothers Back to Black.
One day i didnt rinse and the next day it rained oh Geeez. But i did find a way to take the stuff off, Simple Green!
So i purchased Forever Black Bumper & Trim Dye Kit to apply.
Unless someone here knows how i can solve this problem.
Replacing the covers is not an option unless there is no otherway, only because I will have to remove the Roll&Lock Cover off the bed.
I was looking for someone to custom fabricate a tailgate cap out of Black plexiglass, but i cant find a place or a person that can.
Any help or suggestions on cleaning the caps would be great.
Thanx In Advance
Claude
it actually ran from the top all the way down to the bottom of the truck, just like the rest of the stuff i have used, same problem.
It's a huge product with SAAB-folks as the trim on those cars seems made to fade.