Synergy (or as I now call it; glass in a can)

[Docpeanut]

While priced a bit steep I feel it is indeed worth it. I threw 2 coats on my jeep grand cherokee and barely made a dent in the pot.

This wax can be applied by hand or machine. I used my griots 3" with a red lake country 3 in foam pad. Worked remarkably well. In fact, it took less time to apply 2 coats then it did to buff off one coat.

As for layering, you can stack as many coats on as you'd like, just wait about an hour between.

The results yesterday were stunning, today they were jaw dropping. The jeep is coated with cquk and reload, now synergy as well.

Here's the hood after 120 miles today

 

[Angus]

Very nice!! I'm itching even more now to try out Synergy.

 

[Docpeanut]

I'll be buying a second pot at the next great sale, just to make sure I've always got plenty on my shelf

 

[Ronkh]

How are you loading it on the pad for the griots?

 

[Docpeanut]

How are you loading it on the pad for the griots?

The 3"'pad fits right in the pot, I turned on the polisher (speed 2) for a few seconds and voila!

 

[Ronkh]

The 3"'pad fits right in the pot, I turned on the polisher (speed 2) for a few seconds and voila!

ok, thanks

I did that with a pc and wax got liquefied really fast and overloaded pa(probably did too long or too fast)

 

[Docpeanut]

I just laid the pad (attached) in the pot, no pressure, and no more than 10-15 seconds

 

[Ronkh]

I just laid the pad (attached) in the pot, no pressure, and no more than 10-15 seconds

I'm sure I did it shorter than that (2-3 seconds). But it was a soft wax already.

 

[Docpeanut]

I'm sure I did it shorter than that (2-3 seconds). But it was a soft wax already.

Which wax was it? Another option is to take the pad and prime it by hand, then slap it on the machine and go to town

 

[Todd@RUPES]

Awesome results! Thanks for sharing. Nice to see how it looks on top of CQuartz!