swirl frustration/#9 or DACP

J

jab

New member
Can anyone please give me some advice on using #9 or changing to DACP. I am currently using PC with cma yellow cutting pad. Results could be better in my opinion. I am not sure why the swirl marks are not all going away. Is it that the #9 in not strong enough, or maybee the speed of the PC (5), or not letting the product work its way in. Is DACP a more aggressive product, and if so how much different is it to use than #9. Any advice would be greatly appreciated...
 
Megs #9 is not very abrasive. I used it this summer on my F150 with a PC and white and yellow pads. It removed some of the surface marring but no as much as I had hoped.



I just picked up some DACP last week and will be trying that this spring. I think that you will find that if you use the DACP then the #9 that you willl get much better results. From what I have read on the forum the DACP must be used with the PC until it is almost completely gone since it has diminishing abrasives.



Hope it helps some.
 
You could use DACP without #9, DACP will break down to a fine abrasive. I've gone straight from DACP to a glaze and it looked great. I think it has alot to do with the condition of your paint and the amount of time you want to put into it. If, when your done with DACP your paint looks swirl free then skip the #9, if you see micro-swirls then hit it with some #9... either way if you have the time the #9 couldn't hurt.
 
Thanks , it sounds like good advice. I like to work on my car, so taking the time to do a good job is ok. Nothing worse than spending 2 to 3 hrs trying to remove swirl marks and than following up with polish and klasse SG and still seeing swirl marks under the SG, knowing that you have to do it all over again.SO LESSON LEARNED , USE THE RIGHT PRODUCT FOR THE JOB, AND SAVE SERIOUS TIME AND FRUSTRATION.....
 
If your paint is in good condition and the marring is not beyond the capability of a PC repair...



DACP good

DACP + Meg #9 a little better

DACP + VM very good

DACP + Menzerna IP + Menzerna FP excellent
 
I just spoke to a tech at Meguire that siad that, DACP is not to be used with PC beouse it is not fast enough. Is this true? Or can good results come out of this combo?
 
Well I've never heard that before, I couldn't count the number of people on this forum that use DACP with a PC, hell some people use it by hand.
 
jab said:
I just spoke to a tech at Meguire that siad that, DACP is not to be used with PC beouse it is not fast enough. Is this true? Or can good results come out of this combo?
Click to expand...



I've used DACP with a PC several times and it worked great.
 
Will DACP work with regular orbital buffer (not PC) if I work it long enough? Or will it create swirl because of not enough speed?
 
If you are addressing an inexpensive type buffer ( i.e. Sears 6" and 9" orbital buffers, had one - no comparison to PC), no this type of buffer will not work DACP enough to breakdown polishing agents. Not enough power ( amps) and opm.

If I am not mistaken, Mike (@megiuars) may use a PC occassionally for DACP. :nixweiss
 
The timeing of this thread is perfect. I just spent an hour playing around with my new PC. A couple weeks ago I tried to remove some marring on my door with Swirl Free Polish and didn't get good results. Today I tried DACP and the results were great. I used a yellow Megs polishing pad and started out at speed 4 then turned it up to 6. I worked it untill nothing was left except for some dust. Marring is gone and there was no need to follow up with anything else. The surface looked perfect and ready for AIO and SG. I have read many threads saying if you work DACP long enough you don't need to follow up with a less abrassive product and it worked that way for me today.



jab,



I don't know why the Megs rep told you DACP is not for a PC. It says on the bottle it can be used by hand, orbital, and rotory. I have stopped calling Megs to ask questions about thier products. You can talk to three different reps and get three different answers.
 
Whatever I use to begin a de-marring session, I always finish witn Menzerna's FP, on speed 6, with my PC.
 
Thanks for all the great advice guys, i think i will go for the dacp and use it with a pc., use till its almost gone (POWDERD)and follow with AIO and SG.
 
You must log in or register to reply here.
Back
Top