SSR3 vs DACP

From my experience SSR3 is more abrasive.
It will remove wetsanding scratches with ease.
It is almost more of a compound so you will probably have a haze after using it ... then will need to restore the shine with DACP or my favorite SSR2 followed with SSR1.
I have also found that SSR3 workes better with a rotary.
My .02 ... lets hear what the rest of you think!
 
SSR 2 did for me what DACP wouldn't do. With a rotary and a Meg's cutting pad, I was able to polish out 2000 sanding marks to a ready to was finish.
 
Hmm I have a order now for SSR1 and SSR2 and SSR3 what can I use the SSR3 for how much more abrasive then DACP is it.. I guess I just want it in my arsonal but still.
 
I"ve never used DACP. SSR3 is great w/the rotary on 2k or 1.5k sanding marks. I use it with the rotary followed by SSR2 and then PP. Even at my very amatuerish skill level I can touch up a paint chip, sand it flat and blend it in with the SSR's and PP. It's a good feeling :D ;)
 
DACP is not meant for use with a Rotary (hence Dual Action in the name :) ) and it cannot remove wetsanding marks. It's really a strong swirl remover, and nothing else. If you want to stick with Meguiar's, you need to move up to Compound Power Cleaner or Diamond Cut Cleaner. Most products which can remove sanding marks need to be followed up with a milder abrasive, in my experience. I use Heavy Cut Cleaner followed by DACP, in my case.
 
2wheelsx2 said:
DACP is not meant for use with a Rotary (hence Dual Action in the name :) ) and it cannot remove wetsanding marks. It's really a strong swirl remover, and nothing else. If you want to stick with Meguiar's, you need to move up to Compound Power Cleaner or Diamond Cut Cleaner. Most products which can remove sanding marks need to be followed up with a milder abrasive, in my experience. I use Heavy Cut Cleaner followed by DACP, in my case.
Click to expand...

I think the dual action is POLISHING and CLEANING. The instructions on the bottle CLEARLY explain using it with a DA and ROTARY. As far as polishing out the sanding marks, as long as you don't mind a few applications, it WILL remove the marks and leave a ready to wax finish if done with a rotary (I know cause I have done it), however the SSR2 made quick work of the same and left a mirror that was ready for wax.
 
YAH

the Dual Action referes to the Cleaner/Polish - Clean Dean uses it with a rotary all the time -

I know Meg's has been working on a specific abrasive for DA's like the PC but don't know if they have announced it.
 
Meguiars Product Guide also states DCAP can be used by ... Hand, Orbital, D/A Polisher, Rotary.
I have used it with a rotary as well as a PC ... it cleans well and has some swirl removing capabilities.
 
right now I got SSR1-2-3 in my baskert along with Menzerna FP as I really like the finish it leaves after DACP which I dont know SSR1 will give me there for im going to try both.
 
You must log in or register to reply here.
Back
Top