Ssr 1 Or Ssr 2.5 First???

C

Cozilla

New member
I just got the Poorboys PC kit and i was wondering which one i should start with, the SSR 1 or the SSR 2.5? And also what pads to use with which. I have a lot of swirls and it will be the first time it has been detailed like this. My car is a black 95 BMW 325is coupe.

so what do you suggest?



thanks

colin
 
I would start out with the least aggressive pad and polish first. The SSR1 and white pad. If that doesn't get the results you are looking for bump up to a more aggressive pad or to the SSR2.5. Just remember to always start out least aggressive and work your way up. After the SSR2.5 you will have to finish off with the SSR1.
 
Honestly, SSR1 has like no cut, from the age and the way you describe your finish, you should go straight to the SSR2.5. But just to keep everyone happy, do a little spot with the SSR1 so you can say it didn't work :)
 
Setec Astronomy said:
Honestly, SSR1 has like no cut, from the age and the way you describe your finish, you should go straight to the SSR2.5. But just to keep everyone happy, do a little spot with the SSR1 so you can say it didn't work :)
Click to expand...

Agreed..............Hands down SSR 2.5. SSR1 is more of a maintenance polish......Use for just quick cleaner uppers.........
 
Yea that is what i was goin to do. just go straight to the SSR 2.5 on a cutting pad. then the SSR 1 on a polishing pad? just tryin to get the best process here.



thanks

colin
 
You must log in or register to reply here.
Back
Top