docker
New member
I've been going the UPP/UPPS route on my new auto, a Royal Blue Pearl 06 Civic Sedan. Had 3 layers of UPP on it going into this weekend, then decided to put a couple layers of UPPS on (after bathing the car, of course). I followed the generally accepted guidelines of waiting 12+ hours for the UPPS to cure.
So I took the car out of the garage this afternoon to check it out and noticed on the hood what seemed like some streaking and cloudiness. It's pretty noticable - yuck!
I applied the UPPS pretty liberally - probably 4 squirts for the hood then with the plush side of a Cobra MF spread the liquid over the hood until it pretty much was gone. Flipped the towel and wiped a little to remove the remaining UPPS; I did not, however, buff the surface very much, rather just enough until it became super slick. I will add that it has rained a lot lately and the temp has gone way up, consequently, there has been a lot of moisture in the air even though the car has been in the garage for 4 days straight.
Anyone have any recommendations to get rid of the streaks/cloudiness?
So I took the car out of the garage this afternoon to check it out and noticed on the hood what seemed like some streaking and cloudiness. It's pretty noticable - yuck!
I applied the UPPS pretty liberally - probably 4 squirts for the hood then with the plush side of a Cobra MF spread the liquid over the hood until it pretty much was gone. Flipped the towel and wiped a little to remove the remaining UPPS; I did not, however, buff the surface very much, rather just enough until it became super slick. I will add that it has rained a lot lately and the temp has gone way up, consequently, there has been a lot of moisture in the air even though the car has been in the garage for 4 days straight.
Anyone have any recommendations to get rid of the streaks/cloudiness?