ScratchX Application?

[ForceFed4]

So my car has a few light scratches I'd like to try to remove w/ ScratchX, as well as enough general swirling / spiderwebs that I'd like to try to get them off.



What's the best method of application for Meg's ScratchX?



For the scratches I was planning on using a terry applicator and rubbing perpenticular to the scratch.



For general application I'm not so sure. Should I use foam or terry? Circular rubbing motions or front to back and top to bottom like a finishing product?



The last thing I want to do is make the swirls worse when trying to remove them.



This will all be done by hand, as I don't own a PC of any type.



thanks.

 

[NXT4now]

I have had good success removing scratches with SX. I used a terry applicator, a dab of SX, and went at it in up down left right diagnoal on tough spots.





Here is the link to Mike Philip's write up on how to use Scratch X...



http://www.meguiarsonline.com/forums/showthread.php?threadid=1516

 

[thinksnow]

First of all--Love2shine, you get a huge "BOOOO" for changing your avatar



To the point--I've used Scratch-X with some success on localized scratching and paint scuffs. Hard to explain, but if the scratch were completely vertical (for example), I will attack it with a terry applicator from NE to SW, and from NW to SE. I work the S-X until almost totally gone. With elbow grease, the results are usually great.

 

[04BlackAV]

Yep works good when your hitting a scratch or two.But doing the whole car with it might not get you the results your looking for.



Before my PC I did my wifes Highlander,one side with SX and the other side with 1Z PP.The side with 1Z PP won hands down for ease and results.:xyxthumbs