Joe Metlow
McKee`s 37 Rep
This customer wanted a wash & spray wax. The bottom of the car had the most road grime. I decided to wash the car inside the shop (AC FTW) using the gary dean wash method.
I added about 1.5oz of McKee`s Rinse Free Wash & Wax to about 3 gallons of water.
I pre-soaked 4 microfiber towels.
i Pre-soaked the panel. with this product @ spray wax ratio.
You can see some of the grime.
The pre-soak did a great job breaking down the grime.
I start to clean the panel in a slow snake pattern.
I used the spray wax/detailer as a drying aid after every panel was washed.
pre-soak breaking down the dirt before wash agitation.
did a great job lifting the dirt.
Wheels & Tires (before)
I used N-914 to clean the wheels and tires. this rinseless wash is extremely effective at cleaning wheels/tires.
After wiping the tire with a microfiber towel.
Tires are nice and clean.
The wheels were sprayed with spray wax as I dried.
Dressed the tires.
After
I was really satisfied with my results. the car had a really nice pop and glow to it.
Beading
did some water beading tests to see how the protection was, It looked very nice.
If you want to read the write up I did about how to make spray wax out of this product the link will be below.
http://www.autopia.org/forums/detai...-37-rinse-free-wash-wax-revealing-secret.html
I added about 1.5oz of McKee`s Rinse Free Wash & Wax to about 3 gallons of water.
I pre-soaked 4 microfiber towels.
i Pre-soaked the panel. with this product @ spray wax ratio.
You can see some of the grime.
The pre-soak did a great job breaking down the grime.
I start to clean the panel in a slow snake pattern.
I used the spray wax/detailer as a drying aid after every panel was washed.
pre-soak breaking down the dirt before wash agitation.
did a great job lifting the dirt.
Wheels & Tires (before)
I used N-914 to clean the wheels and tires. this rinseless wash is extremely effective at cleaning wheels/tires.
After wiping the tire with a microfiber towel.
Tires are nice and clean.
The wheels were sprayed with spray wax as I dried.
Dressed the tires.
After
I was really satisfied with my results. the car had a really nice pop and glow to it.
Beading
did some water beading tests to see how the protection was, It looked very nice.
If you want to read the write up I did about how to make spray wax out of this product the link will be below.
http://www.autopia.org/forums/detai...-37-rinse-free-wash-wax-revealing-secret.html