Review: New Wolfgang Swirl Remover 3.0

M

MrNorwall

New member
About my experience with the WG 3.0. IMHO, i think Wolfgang and Menzerna hit the nail on the head with this one. This stuff is good!



My befores didnt come out real good but some 5050s show it off.



Car is a 97 BMW 328i in red.



Supplies:

New Cobra Lime Green Microfiber

New LC Orange Low Pro

New LC White Low Pro

Wolfgand Swirl Remover 3.0

Porter Cable 7424



Before:

051.jpg


The right is after two passes with white pad, removed 90% swirls

049.jpg


053.jpg


After: This is the left side in the 5050, one pass with orange pad, 98% swirls gone

061.jpg


063.jpg




overall good polish, for light swirls, bust out the white, for heavier bust out the orange and your set, again great products wolfgang, recommended! Thanks autogeek.net!
 
why did you mention menzerna ? also, when you mean 1 pass, do you mean passing the polisher through 1 time or the 3-4time back/forth/up/down? thanks
 
Good work. Any reason you went from White to Orange? The orange pads are a medium duty pad and the white's are light duty.. as far as I know?



OOps. Never mind. I see that one side was done with white pads and the other side with orange.
 
yes, i was starting least aggresive to see how it would react, when i saw it wouldnt get all swirls out with white in one pass. I decided to bump it up to orange and it did get all swirls out in one pass.
 
Is 3.0 their heavy cut? I don't want to be rude, but judging by your 50/50's I would say you achieved a maximum of 80 percent removal at best. However, percentage is not important, what is important is the depth of the swirls removed. If all the swirls where the same depth as light hazy swirls you removed, you would achieve 100%. If all the swirls where the same depth as the swirls left behind, you would achieve 0%.



Could you comment on the workabilty of the product and what you did to achieve the results you did (it seems to finish out very nice).
 
Sorry if my previous post came across as rude. I was stating the obvious, but can see that my delivery can sound like I was discrediting your results. I am just more interested in your personal take on how the product worked compared to other's in its range.



Thanks!
 
No i understand. The reason about the 80% was probably because the 5050s were with a white pad and those werent very light swirls. I was testing the level of removal with the white pad and it was like SIP, it could remove some lighter things. The last two pics were after one pass with orange and that in fact got rid of almost all swirls. Under that swirling, there was no deeper scratches noticable.



It left no dusting, which was weird bc i get dusting from SIP.



It broke down quick, not too quick because it got rid of swirls with orange.

Finished pretty much LSP ready.



This is considered there heavy and light polish. Its supposed to be a all in one except no protection and can remove heavier swirls
 
Yes sir! Im thinking about doing a side by side with IP (out of SIP). how would i go about getting a accurate comparision. Like tape off 2 12x12 areas and polish for one minute using same technique? See which one removes the most or if both remove all.
 
You must log in or register to reply here.
Back
Top