Marc08EX
New member
Product Review & How-To: Ultima Waterless Wash Plus
Ultima Waterless Wash Plus+, Ultima waterless car wash, waterless auto wash, spray wash
Description: (Taken from Autopia's website)
Ultima Waterless Wash Plus+ Concentrate
Economical and Environmentally Friendly
Just 1/2 Ounce Makes 22 Ounces Ready To Use Spray Wash
Just 1 Ounce Make 3 Gallons of No Rinse Car Wash Solution
Ultima Waterless Wash Plus+ Concentrate is a hyper-concentrate that can be used to make the Ultima Waterless Wash Plus+ spray wash formula or as a no rinse car wash solution in bucket. Either way, Ultima Waterless Wash Plus+ will not only meet your expectations, it will exceed them in both cleaning ability and gloss enhancement!
Ultima Waterless Wash Plus+ QUICKLY and SAFELY cleans painted surfaces, chrome, plastic, glass and wheels without the use of water. No hoses! No rinsing! No drying! This Boosted by PolychargerTM formula not only cleans your vehicle’s surfaces, it protects from the harsh elements and harmful UV rays.
Price:
$9.99 for 22oz (RTU)
$20.99 for 16oz (Concentrate)
$119.99 for 128oz (Concentrate)
Introduction:
If you have recently read my review on ONR Wash & Wax (Review & How-To: Optimum No Rinse Wash & Wax - Auto Geek Online Auto Detailing Forum), you know how I was afraid to try doing a rinseless wash. It took me a long time to get over it and finally take the plunge to try it. Actually, living conditions forced me to try it. With that said, waterless washing was even scarier!!! I mean how would you have enough lubrication and not scratch your paint by spraying product on the surface right?
I never really paid any attention to waterless washes until Meguiar's came out with their Ultimate Wash and Wax Anywhere. I'm a big Meguiar's nut and I love everything about them. I've been driving all the way to Irvine, CA to hangout in their Thursday Night Open Garages. I was fortunate enough to get a demo from MOL administrator himself, Michael Stoops. After that and his assurance, I was hooked.
Now let me show you how I do a waterless wash.
How-To Do A Waterless Car Wash:
I'm not going to type the product's directions but instead show you:
I first start off by misting the waterless wash solution on the panel I'm working on. It is important to point out that you should work on small sections at a time. You can even break down an entire panel if you want to. No one's rushing you. Take your time because technique is EXTREMELY important here.
The directions say to lightly mist the surface. I think I tend to spray more than I have to but I'd rather to do that for peace of mind and to reduce the potential of scratching. Here's a shot on how much product is on the surface:
As I mentioned above, technique is very important here. You will need lots of microfiber towels. Don't feel bad if you have to use more than you have to. It's easier to wash your dirty microfiber towels than to polish out swirls and scratches created by a dirty towel.
I learned the technique I'm going to show you from the MOL administrator himself, Michael Stoops. Since everybody is now calling a way of doing things with "their name" method, I'm going to dub this technique the
"Michael Stoops Waterless Wash Method" or MSWWM for short.
For reference, here is the thread that he started in MOL: Ultimate Wash & Wax Anywhere - Tips & Tricks
So what you do is you fold your microfiber towel into a manageable size. I folded my Meguiar's Supreme Shine microfiber towel 3x. What you do is you keep the microfiber towel flat on the surface and perform a swipe as shown below:
How long you swipe will highly depend on how soiled the surface is. It's really a judgement call and totally up to you. If you want to be safer then you can stop halfway.
After your first swipe, you will see a line of dirt in your microfiber towel as shown below:
What you do next is tilt the microfiber towel to expose a clean part of that same fold. That way, you're not rubbing around the dirt taken from the first swipe on the paint surface. This is what I mean. This is a shot of me doing the second swipe of that same panel with the microfiber towel titled:
Here's a picture showing the 2nd line of dirt from the 2nd swipe. As you can see, the dirt was embedded on a different section than the first swipe. The dirt from the first swipe never had contact in the paint.
Now you keep on repeating this until you've soiled that side of the microfiber towel. Here's a shot showing the third swipe:
Consequently, here's a shot showing the 3rd line of dirt:
As you can see, majority of this specific side of the towel is already soiled. What you do next is flip the towel and expose a clean side and keep on repeating.
After you're done with washing the panel you're working on, you'll use a 2nd dry microfiber towel to buff off the excess product away.
Here's another set of pictures of me showing the Michael Stoops Waterless Wash Method:
Spray the section you're working on. In this case, I'm working on the driver side half of the hood:
Again, here's the amount of product that I sprayed on the surface:
First swipe:
Dirt from the first swipe:
Second swipe:
Third swipe:
Dirt from multiple swipes:
Now as you use up all the clean sides of the microfiber towel, that whole towel will be soiled and your towel should look something like this:
What you do next is you use your drying towel as your cleaning towel and get a new towel as your drying towel. As your towels become soiled, you will repeat this rotating process between the drying towel and the cleaning towel.
For this 2011 Subaru WRX STi that I cleaned for this review, I used up 5 towels. I also used up 80% of the UWW+ bottle because the vehicle was extremely dirty. The number of towels and how much product you'll use will vary depending on how dirty the vehicle is and your judgement.
Ultima Waterless Wash Plus+, Ultima waterless car wash, waterless auto wash, spray wash
Description: (Taken from Autopia's website)
Ultima Waterless Wash Plus+ Concentrate
Economical and Environmentally Friendly
Just 1/2 Ounce Makes 22 Ounces Ready To Use Spray Wash
Just 1 Ounce Make 3 Gallons of No Rinse Car Wash Solution
Ultima Waterless Wash Plus+ Concentrate is a hyper-concentrate that can be used to make the Ultima Waterless Wash Plus+ spray wash formula or as a no rinse car wash solution in bucket. Either way, Ultima Waterless Wash Plus+ will not only meet your expectations, it will exceed them in both cleaning ability and gloss enhancement!
Ultima Waterless Wash Plus+ QUICKLY and SAFELY cleans painted surfaces, chrome, plastic, glass and wheels without the use of water. No hoses! No rinsing! No drying! This Boosted by PolychargerTM formula not only cleans your vehicle’s surfaces, it protects from the harsh elements and harmful UV rays.
Price:
$9.99 for 22oz (RTU)
$20.99 for 16oz (Concentrate)
$119.99 for 128oz (Concentrate)
Introduction:
If you have recently read my review on ONR Wash & Wax (Review & How-To: Optimum No Rinse Wash & Wax - Auto Geek Online Auto Detailing Forum), you know how I was afraid to try doing a rinseless wash. It took me a long time to get over it and finally take the plunge to try it. Actually, living conditions forced me to try it. With that said, waterless washing was even scarier!!! I mean how would you have enough lubrication and not scratch your paint by spraying product on the surface right?
I never really paid any attention to waterless washes until Meguiar's came out with their Ultimate Wash and Wax Anywhere. I'm a big Meguiar's nut and I love everything about them. I've been driving all the way to Irvine, CA to hangout in their Thursday Night Open Garages. I was fortunate enough to get a demo from MOL administrator himself, Michael Stoops. After that and his assurance, I was hooked.
Now let me show you how I do a waterless wash.
How-To Do A Waterless Car Wash:
I'm not going to type the product's directions but instead show you:
I first start off by misting the waterless wash solution on the panel I'm working on. It is important to point out that you should work on small sections at a time. You can even break down an entire panel if you want to. No one's rushing you. Take your time because technique is EXTREMELY important here.
The directions say to lightly mist the surface. I think I tend to spray more than I have to but I'd rather to do that for peace of mind and to reduce the potential of scratching. Here's a shot on how much product is on the surface:
As I mentioned above, technique is very important here. You will need lots of microfiber towels. Don't feel bad if you have to use more than you have to. It's easier to wash your dirty microfiber towels than to polish out swirls and scratches created by a dirty towel.
I learned the technique I'm going to show you from the MOL administrator himself, Michael Stoops. Since everybody is now calling a way of doing things with "their name" method, I'm going to dub this technique the
"Michael Stoops Waterless Wash Method" or MSWWM for short.
For reference, here is the thread that he started in MOL: Ultimate Wash & Wax Anywhere - Tips & Tricks
So what you do is you fold your microfiber towel into a manageable size. I folded my Meguiar's Supreme Shine microfiber towel 3x. What you do is you keep the microfiber towel flat on the surface and perform a swipe as shown below:
How long you swipe will highly depend on how soiled the surface is. It's really a judgement call and totally up to you. If you want to be safer then you can stop halfway.
After your first swipe, you will see a line of dirt in your microfiber towel as shown below:
What you do next is tilt the microfiber towel to expose a clean part of that same fold. That way, you're not rubbing around the dirt taken from the first swipe on the paint surface. This is what I mean. This is a shot of me doing the second swipe of that same panel with the microfiber towel titled:
Here's a picture showing the 2nd line of dirt from the 2nd swipe. As you can see, the dirt was embedded on a different section than the first swipe. The dirt from the first swipe never had contact in the paint.
Now you keep on repeating this until you've soiled that side of the microfiber towel. Here's a shot showing the third swipe:
Consequently, here's a shot showing the 3rd line of dirt:
As you can see, majority of this specific side of the towel is already soiled. What you do next is flip the towel and expose a clean side and keep on repeating.
After you're done with washing the panel you're working on, you'll use a 2nd dry microfiber towel to buff off the excess product away.
Here's another set of pictures of me showing the Michael Stoops Waterless Wash Method:
Spray the section you're working on. In this case, I'm working on the driver side half of the hood:
Again, here's the amount of product that I sprayed on the surface:
First swipe:
Dirt from the first swipe:
Second swipe:
Third swipe:
Dirt from multiple swipes:
Now as you use up all the clean sides of the microfiber towel, that whole towel will be soiled and your towel should look something like this:
What you do next is you use your drying towel as your cleaning towel and get a new towel as your drying towel. As your towels become soiled, you will repeat this rotating process between the drying towel and the cleaning towel.
For this 2011 Subaru WRX STi that I cleaned for this review, I used up 5 towels. I also used up 80% of the UWW+ bottle because the vehicle was extremely dirty. The number of towels and how much product you'll use will vary depending on how dirty the vehicle is and your judgement.
