Removing transport wax from alloys

C

Ch96067

New member
A friend's car is left with spots of transport wax on the wheels after dewaxing from the dealer.



Time has passed, so he thinks he can't take it back for free of charge cleaning (well he may try during the next service). He has already tried 'solventy' products (like I have read here) with about 60-70% success, but lumps remain.



I suggested clay. Any other thoughts/proposals?



Thank you in advance.
 
a good strong wheel cleaner but it may take several applications. using clay and wheel cleaner at the same time may speed up the process. a good de waxing product might do the trick. if the wheels are painted a paint decon system would do the trick. paint prep stuff like prep-sol or ipa would be something else to try.
 
Chevy Spark. Not sure about the production country. No pics unfortunately as well. I know it is little to go on and I appreciate any suggestion from chemical to mechanical means.
 
Transit protection waxes used to protect paintwork, metal and glass surfaces can be removed with either P21S Total Auto Wash or 3M™ Adhesive Remover and Surface Cleaner; both are safe solvents that are very effective for the removal of copolymer or Microcrystalline wax protective coatings from new vehicle exterior surfaces, especially imported vehicles or those standing in holding yards for extended periods
 
Thank you all for the info. I think the 3m looks a more accessible option so far. Could something like 1Z acrysol also work?
 
If the vehicle was produced, in the last three or four years, ( in an EU country) the coating is a synthetic transit coating, not a wax based.

You may be surprised how easy it is to remove, if you take some time to allow "dwell" or setting of a quality all purpose on the spots.

You can't hurry the process, just keep it "soaked" with an APC, checking to see, with your finger nail if the spots are "getting soft", IE, leaves a mark in the deposit, may take up to thirty minutes to work.

I may be wrong, since I don't know what plant assembled the vehicle, so good luck.

If the APC, soaked, doesn't do the job, then go ahead and try a petro based solvent.

Not the best thing to use on the polyester or acrylic powder coat that is on the wheels, so just be careful.

Grumpy
 
You must log in or register to reply here.
Back
Top