Questions on S100

[Envoy Fan]

Hello all, this is my first post. Just joined, and am finding a lot of good info here.

Question #1, Using the S100 Conditioner, can this product be used with the PC, or only by hand?

Question #2, Using the S100 Wax, can this product be used with the PC, or only applied by hand.

Question #3, Should a sealer be used before or after the S100 Wax, and if so, what are some suggestions?

Question #4, Can a sealer or S100 be applied with multiple coats for a good deep layered effect?

Thanks for helping a noob out.

 

[The Fuzz]

#1- don't know what that is. Are you talking about the Shine Enhancing Polish Cleaner? If so, then yes it can be applied by hand or PC.

#2- its a paste wax. if you can get it on a PC then go for it. I would just stick to using it by hand.

#3- Many people do use a sealant prior to a wax. Look around and do some searches on sealants to make a decision. There are a dozen choices and as many opinions as there are people. Its up to you which you like best.

#4- S100 can be layered as many times as you want. The problem with layering waxes is that it can build up and diminish the appearance after awhile. I wouldn't go too crazy with it. maybe put on a coat of wax every 3 weeks to keep it looking fresh. You can't layer sealants over waxes, so do all your layering with that product before you put wax on it.

Thanks for helping a noob out.

No problem, noob. Welcome to DC! :newbie

 

[CharlesW]

Hello all, this is my first post. Just joined, and am finding a lot of good info here.

Question #1, Using the S100 Conditioner, can this product be used with the PC, or only by hand?

Question #2, Using the S100 Wax, can this product be used with the PC, or only applied by hand.

Question #3, Should a sealer be used before or after the S100 Wax, and if so, what are some suggestions?

Question #4, Can a sealer or S100 be applied with multiple coats for a good deep layered effect?

Thanks for helping a noob out.

Welcome to DC!

#1. S100 SEC (Shine Enhancing Cleanser) works great with the PC. (Or by hand)

#2. Since you remove S100 Carnauba right after applying it to each panel, I would think the PC would be more effort than by hand. It truly is a wipe on, wipe off product.

#3a. Before. Sealants don't bond well to a waxed surface.
#3b. Lots of good sealants, but my favorite is 4 Star UPP.

#4. Layering is open to debate. I do apply two coats of most LSP's, but it's mostly to be sure I have good coverage. The instructions for UPP say it should have 24 hours between coats, so that's what I do.

Charles