krouchchocolate
New member
Is it good to apply the klasse SG after the AIO if my garage is dusty? Will it affect it any since the SG has to cure for 24 hours?
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Question? Applying Klasse SG after AIO
- Thread starter krouchchocolate
- Start date
imported_steveo3002
New member
it would be a bad idea to use any detailing product in a dusty garage, chances are you will scrub the dust into the finish when it comes to removal
you dont have to let sg sit 24hrs...many people use a wipe on ,wipe off method...or let it sit for a while and remove...have a search on it ,theres lots of info about it
you dont have to let sg sit 24hrs...many people use a wipe on ,wipe off method...or let it sit for a while and remove...have a search on it ,theres lots of info about it
yeah . . . good avice here. the wiped off product is usually what most of us let "cure" before appling a topper or exposing the car to harsh weather. I personally just Wipe on and then wipe off. I usually do the car in 4 sections, so the KSG has a small window to "set" before I wipe it off. I have personally attested to the many suggestions of 8-10 hours for the buffed off KSG to cure. 24 hours may be excesive with the exception of very cold detailing conditions. I just applied a coat of AIO KSG yesterday and i let it stay in my garage overnight for about 9 hours. Its good to go....no streaking, blotches, etc, etc.
krouchchocolate
New member
i think i will blow all the dust out in the garage with the blower before i detail my mom's car.
antidote11
New member
I use AIO and SG and my garage is dusty. I have never had a problem.
What I do is apply the SG (I let it sit for 24 hours) and then very lightly
run a MF towel over it to get the dust off, then I rub the SG off. :heelclick
What I do is apply the SG (I let it sit for 24 hours) and then very lightly
run a MF towel over it to get the dust off, then I rub the SG off. :heelclick
krouchchocolate
New member
antidote11 said:I use AIO and SG and my garage is dusty. I have never had a problem.
What I do is apply the SG (I let it sit for 24 hours) and then very lightly
run a MF towel over it to get the dust off, then I rub the SG off. :heelclick
i thought you leave the SG on...then apply a layer of wax. So after leaving it to dry after 9-24 hours, I use a dry to wipe it off?
mikebai1990
New member
krouchchocolate said:i think i will blow all the dust out in the garage with the blower before i detail my mom's car.
I think that blowing the dust will just allow the dust particles to be airborne. Perhaps a better idea would be to vacuum the dust out? If you don't have a vacuum, I guess you could blow the dust and then allow it to settle for a few hours.
I've had better luck using a broom to get dust out than using a blower - the blower gets the fine particles up in the air, which then takes forever to settle.
Not tried, but how about a mist of water sprayed in the air and on the floor? I would think it wouldn't take much - just enough to settle out airborne dust and keep foot movement from kicking up dust on the floor.
Not tried, but how about a mist of water sprayed in the air and on the floor? I would think it wouldn't take much - just enough to settle out airborne dust and keep foot movement from kicking up dust on the floor.
antidote11
New member
krouchchocolate said:i thought you leave the SG on...then apply a layer of wax. So after leaving it to dry after 9-24 hours, I use a dry to wipe it off?
You want to wipe the SG off. What I do is SG the whole car and let it sit for about 24 hours or so. Then I wipe it all off as good as I can. I then come back and use a QD mist and wipe the whole car down. I do that about 3-4 times until I have 3-4 layers of SG on the car. After all the SG is wiped off and the car is QD misted and cleaned, I then apply the wax.