Probably Polishing a 2006 Mustang Need Advice ....

I

imported_RyansAutoDetail

New member
I am going to be getting a black 06 mustang probably tomorrow to polish and wax and need some input asap .



From the description from the client it has pretty rough shape exterior looks as in swiry and scratching that is obviously noticeable as it is black and he wants it as best possible on the outside



i have the following products and polisher



PC7424

4inch PFW, yellow, orange and white pads

6.5inch orange, white, black, blue pads



megs m105

PB SSR2.5

PB propolish

menzerna finishing glaze



nxt2.0

optimum car wax

P21s paste wax





i want to achieve optimum results and am under the impression this paint could be trashed ...



any suggestions anyone ?
 
anyone know a plan of attack as i have only upwards of 6 hours with this car .



my windstar mini van took 4 hours but i only did one pass with ssr2.5 and one pass pro polish and one pass menzerna glaze then one wax pass with nxt ..



im thinking a sports coupe should take a similar amount of time even with more attention to detail ... ???



basically i need a method that will work for 99% of the car under 6 hours .
 
The Pb's Pro Polish is really more of a cleaner and IMO is redundant in this application. I would also question if the Menz glaze is really necessary. I have never used 105 but from what I understand it can finish down almost LSP-ready, so maybe the 105 followed by the Menz glaze? Or 105/SSR2.5 should be fine...at any rate you certainly shouldn't need 4 steps.
 
I would say one or the other, based on the limited info. Every car is different, and you haven't even seen this one. Often cars have refinished panels, which may behave completely differently from the rest of the vehicle, etc.
 
You must log in or register to reply here.
Back
Top